User manual EINHELL DSL 250-2

[. . . ] Operators and other personnel are to stay out of the danger zone during the trial run. hold the rotating grinding pin away from the body. Never halt a grinding wheel by pressing on its circumference or face. Tighten the lock nut only enough to hold the grinding wheel securely in place. [. . . ] Insert adapter sleeve size Ø 3 mm or Ø 6 mm depending on which grinding pin you want to use. To do so, unscrew the lock nut, insert the adapter sleeve and re-tighten the lock nut by hand. Then insert the correct grinding pin (make sure it has the correct shaft diameter!) and tighten the lock nut with the two chuck keys, using the one key to hold the adapter sleeve mount. Observance of the following maintenance instructions will ensure that this quality tool gives you years of troublefree service. regular lubrication is vital for the long-term , reliable operation of your pin grinder. Use only special tool oil for this purpose. You can choose from the following options for lubricating the tool: 6. 1 By mist oiler A complete conditioning unit includes a mist oiler and is fitted to the compressor. 2 By hand Each time before you use your impactscrewdriver, feed 3-5 drops of special tool oil into the air connection. If the pneumatic tool has not been used for several days, you must feed 5-10 drops of oil into the air connection before you switch on. Keep your pneumatic tool in dry rooms only. : Idle speed: Air consumption: Recommended hose diameter: Sound pressure level LPA: Sound power level LWA: Vibration aw: Weight: Air quality cleaned and oiled Air supply via conditioning unit with filter pressure reducer and mist oiler Compressor capacity approx. 2 kW Work settings 6 bar working pressure set at the pressure reducer or filter pressure reducer Please note: When working with the pin grinder, be sure to wear the necessary protective clothing. Wearing parts Damage caused by an unacceptable level of working pressure. 1 Cleaning Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure. We recommend that you clean the device immediately each time you have finished using it. Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into the device. 2 Maintenance There are no parts inside the equipment which require additional maintenance. [. . . ] In order to assert your guarantee claim, please send your defective device postage-free to the address shown below. Please enclose either the original or a copy of your sales receipt or another dated proof of purchase. Please keep your sales receipt in a safe place, as it is your proof of purchase. It would help us if you could describe the nature of the problem in as much detail as possible. [. . . ]