User manual EINHELL ELH 2500

[. . . ] Please read the directions for use carefully and observe the information provided. It is important to consult these instructions in order to acquaint yourself with the machine, its proper use and safety precautions. Keep these instructions in a safe place. Improper operation of the electric garden refuse shredder can lead to serious injuries. [. . . ] Intensive vibration is usually a sign that something is wrong. If the connection lead for this machine is damaged, it must be replaced by the manufacturer or its after-sales service or similarly trained personnel to avoid danger. The cutters continue to run for a few seconds after the motor is switched off. And follow the warnings and safety instructions Important!Always wear safety goggles, ear protection, protective gloves and heavy-duty work clothes. We recommend that you wear a helmet with a face guard. Protect the machine from the damp and never expose it to rain. Always set the ON/OFF switch to OFF and pull the power plug out of the socket-outlet before doing any work on the shredder, e. Cleaning the shredder and making adjustments, or if the power cable becomes damaged. If the mains lead is damaged or cut, pull out the power plug immediately. Pieces of shredded material may be catapulted out of the shredder during operation. Keep a safe distance between yourself and the machine. Voltage: Power rating: Cutting unit idling speed Branch diameter: LPA sound pressure level: LWA sound power level: Weight: 230 V ~ 50 Hz 2500 W (S6-40%) 2000 W (S1) 40 min-1 max. Maximum power consumption depends on the consistency of the material being shredded. This electric garden refuse shredder is designed only Leaves, branches, dead flowers etc. Collecting the shredded material A container can be placed underneath the ejector opening to catch the shredded material. Large items or pieces of wood will be discharged both in the cutting and in the release direction after the blade has been started and reversed several times. 1 / Item 2) An overload (for example if the blade is jammed) will cause the machine to cut out after a few seconds. To protect the motor from damage the motor protection switch stops the power supply automatically. Wait for at least one minute before you press the reset knob so that you can restart the machine. If the blade becomes jammed, turn the switch for selecting the direction of rotation to the left to position "1" before you switch on the shredder again. 4 Practical tips Read the special and general safety instructions (section 1). [. . . ] After a half-turn the counter blade will have moved 0. After completing this adjustment check whether the blade produces the desired results. IMPORTANT: If the shredding blade touches the counter blade, it will cut it and small metal chips may fall out of the discharge opening. This is not a fault, but it must only be adjusted as much as necessary since otherwise the counter blade will suffer premature wear. [. . . ]