User manual EINHELL RT-CD 9.6 P

[. . . ] Read all safety regulations and instructions. Any errors made in following the safety regulations and instructions may result in an electric shock, fire and/or serious injury. Keep all safety regulations and instructions in a safe place for future use. Sound and vibration values were measured in accordance with EN 60745. [. . . ] If the battery pack fails to become charged, please check whether there is voltage at the socket-outlet whether there is proper contact at the charging contacts on the charger. If the battery still fails to become charged, please return the charger the battery pack to our Customer Service Department. To ensure that the battery pack provides long service, you should take care to recharge it promptly. You must recharge the battery pack when you notice that the power of the cordless screwdriver drops. Set the changeover switch (3) to its centre position whenever you carry out any work (for example changing the tool, maintenance work, etc. The chuck opening (a) must be large enough to hold the tool (drill bit or screwdriver bit). Push the tool as far as possible into the chuck opening (a). Be sure to use a bit that matches the screw in shape and size. Set the torque, as described elsewhere in these operating instructions, to suit the size of screw. Replacement part number of the part required For our latest prices and information please go to www. The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system. The unit and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. Always pull out the mains power plug before starting any cleaning work. 1 Cleaning Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure. We recommend that you clean the device immediately each time you have finished using it. Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into the device. 2 Maintenance There are no parts inside the equipment which require additional maintenance. [. . . ] In order to assert your guarantee claim, please send your defective device postage-free to the address shown below. Please enclose either the original or a copy of your sales receipt or another dated proof of purchase. Please keep your sales receipt in a safe place, as it is your proof of purchase. It would help us if you could describe the nature of the problem in as much detail as possible. [. . . ]