User manual EIZO COLOREDGE CG301W

[. . . ] Important Please read this User's Manual carefully to familiarize yourself with safe and effective usage. SAFETY SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The mode only for calibration software Color Adjustment of the Mode Settings <Brightness>, <Temperature> and <Gamma> settings can be adjusted on the FineContrast menu. Select the desired function icon with and adjust with . (Setting(s) of <Temperature> and/or <Gamma> is defined as standard default in some modes. NOTE · "EMU" mode and "CAL" mode can be adjusted only by Calibration Software. 1 3. Screen Adjustment and Settings Advanced Adjustments[Adjustment menu] Color settings of each FineContrast mode can be adjusted and saved by using the <Color> menu of the Adjustment menu. AdjustmentItems The adjustable items and displayed icons on the <Color> menu depend on the selected FineContrast mode. " ": Settable/Adjustable " - ": Fixed at the factory Icons Functions Brightness* Temperature* Gamma* Saturation Hue Gain 6 colors Reset Custom FineContrast Mode sRGB EMU CAL * These settings can be also adjusted on the FineContrast menu. NOTE · Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. (Allow the monitor to warm up for at least 30 minutes before making adjustments. ) · The values shown in percentages represent the current level within the specific adjustment. They are available only as a reference tool. (To create a uniform white or black screen, the percentages for each will probably not be the same. ) 1 3. Screen Adjustment and Settings AdjustmentContents Menu Brightness Function Descriptions To set the brightness of the screen 0~100% Adjustable range Tips Temperature · The values shown in the "%" are available only as reference. To set the color temperature 4000K~10000K in 500 K increments (including 9300 K) Tips · The values shown in the Kelvin are available only as a reference tool. · While color temperature is adjusted, <Gain> is adjusted automatically according to the color temperature. · Setting the temperature under 4000 K or over 10000 K invalidates the color temperature setting. (The color temperature's setting turns "OFF". ) Gamma · Setting the <Gain> invalidates the <Temperature> adjustment. To set the gamma value 1. 8~2. 6 Saturation To change the saturation -100~100 Setting the minimum level (-100) turns the image to the monochrome. NOTE Hue · The <Saturation> adjustment may cause undisplayable color tone. -100~100 NOTE Gain · Using <Hue> adjustment may not obtain proper tone reproduction. To change each color 0~100% (red, green and blue) By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Display a white or gray background image and adjust the <Gain>. Tips · The values shown in the "%" are available only as reference. · The <Temperature> setting invalidates this setting. The <Gain> setting varies with color temperature. To adjust <Saturation> and <Hue> in Hue: -100 ~ 100 each color (Red, Yellow, Green, Cyan, Saturation: -100 ~ 100 Blue and Magenta) To reset the color settings of the selected FineContrast mode to the default settings. 6 colors Reset 1 3. Power-save Setup The <PowerManager> menu in the ScreenManager enables to set the power-save setup. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. [. . . ]