User manual EIZO FLEXSCAN HD2442W

[. . . ] Notice for this monitor CONTENTS Chapter 1 Features and Overview 1-1 Features 1-2 Names of Switches 1-3 Operation Switch Usage 1-4 Functions of Remote Control Buttons 1-5 Functions and Basic Operation Chapter 2 Settings and Adjustment 2-1 Input Signal Switching 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Sound Adjustment 2-5 Auto Screen Size Changing Important Please read PRECAUTIONS, this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. 2-6 Screen Ratio Changing 2-7 Monitor Power-saving Mode Setting 2-8 Power Indicator/EIZO Logo Display Setting 2-9 Beeper Setting 2-10 Information Checking 2-11 Language Setting to be displayed 2-12 Locking Switches 2-13 Resumption of Default Settings The latest User's Manual is available for download from our site: http://www. eizo. com Chapter 3 Troubleshooting Chapter 4 Reference 4-1 Attaching an Arm 4-2 Specifications 4-3 Glossary 4-4 Preset Timing How to Use Remote Control The following setting and adjustments are available with remote control. For the details on the usages, please read the Remote Control Guide (separate volume). - Off Timer Setting - Color Mode Changing - Screen Size Changing - (When displaying game images) Screen Size Changing/"Thru Mode" Setting - USB Setting Changing - Volume Adjustment/Muting - Input Signal Switching - PinP (Picture in Picture) Display How to Setup Please read the Setup Manual (separate volume). As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product meetstheENERGYSTARguidelinesforenergyefficiency. Using the special functions, such as screen size change (ex. changing the horizontal and vertical ratio of images input) for commercial purposes or for the purpose of showing in public may violate copyright laws. [. . . ] (the left, right, upper and lower parts of the input image slightly cut off) Displays most of the input image. Displays the image keeping the aspect ratio of 16:9. The left and right parts of the image slightly cut off. (Note that the image of 4:3 or Letterbox is displayed as same as the image of "Full Image" setting, even though "Full Screen" is selected. ) NOTE · When selecting "Full Image" or "Standard", the black borders may be displayed on the left and right, or upper and lower parts according to the aspect ratio of the input signal. · Select "Full Image" when the noise appears around the peripheral portions of the screen image with "Standard" selected. 24 Chapter 2 Settings and Adjustment Input signal:Aspect ratio (Format) Screen Ratio 4:3 (480i/480p/ 76i/76p) Letterbox (480i/480p/ 76i/76p) 16:9 (480i/480p/ 76i/76p) (1080i/720p/1080p) Standard Full Image Full Screen 2-7 To set the resume conditions from the power-saving mode [Signal Detection] This function sets the power-saving mode condition when no input signal is detected on the current selected input signal and the resume conditions from the power-saving mode. Settings All Input Signals No input signal Resume conditions from power-saving mode Monitor Power-saving Mode Setting Attention Current Input Signal All input signals are watched and if any signal is detected in the no-signal status, the monitor resumes to display the projected image with the After 5 seconds have passed detected input signal. with no input signal detected, The signal selected when the monitor enters the power- entering the power-saving saving mode. mode is watched and if any signal is detected in no signal status, the monitor resumes to display the projected image with the current input signal selected. After 45 seconds with no input signal status, the monitor enters power off status. · The monitor watches the input signal status. If the input signal is detected before entering the power-saving mode, the signal detection is not recognized as a resume condition. · When displayed in PinP, the monitor does not shift to power-saving mode. · If it is set to "All Input Signals", the monitor may not resume from the power-saving mode depending on the connected external equipments or some conditions. When the monitor does not resume, change the setting or touch the slide bar and then select the input signal for the desired image sent from the equipment. Disable Attention [Procedure] (1) Choose the <Monitor Settings> icon in the Setting menu and tap the slide bar. (2) Choose the <Signal Detection > icon in the <Monitor Settings> menu and tap the slide bar. The <Signal Detection > menu appears. (3) Trace the slide bar left and right to select either "All Input Signals", "Current Input Signal" or "Disable" and tap the slide bar. The signal detection setting is completed. · Unplugging the power cord completely shuts off power supply to the monitor. · Even if the monitor enters the sleep mode, all the devices connected to the USB ports (upstream and downstream) work. (Therefore the monitor power consumption varies with connected devices even in the power-saving mode. ) Chapter 2 Settings and Adjustment 2 2-8 To turn off the power indicator while a screen is displayed [Power Indicator] This function enables you to turn off the Power indicator (blue) while a screen is displayed. [Procedure] (1) Choose the <Monitor Settings> icon in the Setting menu and tap the slide bar. (2) Choose the <Power Indicator> icon in the <Monitor Settings> menu and tap the slide bar. The <Power Indicator> menu appears. NOTE Power Indicator/EIZO Logo Display Setting · The Power indicator lights up at power on with the default setting. (3) Trace the slide bar left and right to select "Off" and tap the slide bar. The power indicator setting is completed. To set EIZO logo display/no EIZO logo display when the monitor turns on [EIZO Logo Appearing Function] When the unit is turned on, the EIZO logo appears at the center of the screen. This function enables you to select Logo display/No logo display. [Setting Methods] (1) Touch to turn off the monitor. three seconds. The EIZO logo does not appear on the screen. NOTE · The logo appears with the default setting. [Resetting] (1) Touch to turn off the monitor. three seconds. The logo appears again. 2-9 To set the beeper [Beep] Beeper Setting Set the beeper on/off for operation tone of the switches, connection error, etc. Sound type Short beep Long beep Status · Sounds whenever a basic switch operation is performed. · Sounds when "On" or "Off" in the operation lock function is selected. [. . . ] * * * * Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser's authority to operate the equipment. [. . . ]