User manual EIZO FLEXSCAN L557

[. . . ] Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. [. . . ] Have the unit checked by a qualified service engineer before using it again. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. Not doing so may result in fire, electric shock, or equipment damage. Do not place in a location where the steam comes directly on the screen. Do not place near heat generating devices or a humidifier. Not doing so may result in fire or electric shock. Do not place any objects on the ventilation slots. Do not install the unit in a closed space. Plug the power cord into a power outlet and the Power connector on the monitor. Use the monitor with the recommended resolution shown below. Height adjustable stand Hold left and right edge of the monitor with both hands to adjust the screen up, down, left and right directions. Tilt stand Hold left and right edge of the monitor with both hands to adjust the screen angle. ArcSwing 2 stand Hold left and right edge of the monitor with both hands to adjust the screen to and fro, and left and right directions. EZ-UP stand Hold the left and right edges of the monitor with both hands and adjust the screen angle by moving them upwards, downwards, or to the left or right. The monitor's Power indicator lights up blue and the screen image appears. When turning on the monitor and PC for the first time with the analog signal, the Auto Adjustment function works to adjust the clock, phase, and display position automatically. When using the digital signal, the images are displayed correctly based on the preset data of the monitor. Turn off the monitor and PC after using them. [. . . ] Turn off the monitor and PC after using them. Unplugging the power cord completely shuts off power supply to the monitor. Screen will be adjusted automatically to the appropriate brightness that accepted environment as the sensor on the lower side of the monitor detects the surrounding brightness with the BrightRegulator function. Advanced adjustments for the screen or color and various settings are available using the Adjustment menu. [. . . ]