User manual EIZO FLEXSCAN L661

[. . . ] User's Manual Color LCD Monitor CONTENTS PRECAUTIONS __________________________ 4 INTRODUCTION _________________________ 9 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Controls & Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1 INSTALLATION _______________________ 11 1-1 Connecting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] c) After finishing the adjustment, push the Enter button to memorize the settings and return to the "Screen" menu. E · "Phase" adjustments should be done after adjusting the "Clock". · Horizontal bars may not completely disappear from the screen depending on the PC. · The phase adjustment decides the sampling point for converting the analog input signal to a digital signal. Adjusting the "Phase" after the "Clock" adjustment will produce a clear screen. (6) Position Adjusment Function Controls the screen position. a) Select the "Position" icon and push the Enter button to enter the "Position menu. Adjustment markers are displayed on each corner of the screen. b) Adjust the position of the upper left corner of the image using the Control buttons in order to align the screen. · If vertical bars of distortion appear after finishing the "Position" adjustment, return to "Clock" menu and repeat the previously explained adjustment procedure ("Clock" "Phase" "Position"). 2 USING THE SCREENMANAGER 23 (7) "Resolution" Adjustment Function Controls the contrast of the screen. a) Select the "Contrast" icon and push the Enter button to show the "Contrast/Brightness" menu. b) Confirm if the resolution now being displayed is the same as the input resolution. If it is not, adjust the vertical resolution using the up and down button and adjust the horizontal resolution using the right and left buttons. c) After finishing the adjustment, push the Enter button to memorize the settings and return to the "Screen" menu. Smaller than the actual screen images. Adjusted to actual screen size. Larger than the actual screen images. (8) "Contrast" Adjustment Function Controls the contrast of the screen. a) Select the "Contrast" icon and push the Enter button. b) Press the Auto adjustment button on the front panel while displaying the "Contrast/Brightness menu to automatically adjust contrast. c) The screen blanks for a moment and adjusts the contrast to the maximum level of the current input signal. (continued) OK Too High Too Low 24 2 USING THE SCREENMANAGER Function * In the case of the percentage color flickering between yellow and white, please note that this is not an error but actually the most optimum adjustment point. * The brightness of the entire screen is controlled by changing the "Brightness" controls. No contrast adjustment is required except when the graphics board or the resolution is changed from the previous one. d) Adjust the "Brightness" as desired using the up and down button. e) After finishing the adjustment, push the Enter button to memorize the settings and return to the "Screen" menu. E (9) Exit the ScreenManager a) To return to the main menu, select the "Return" icon or push the down button twice, followed by the Enter button. b) To exit the ScreenManager, select the "Exit" icon and push the Enter button. Double clicking the Enter button at any time also exits the ScreenManager menu. [. . . ] Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed. * Bio-accumulative is defined as substances which accumulate within living organisms. ** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative. For U. S. A, Canada, etc. [. . . ]