User manual EIZO FLEXSCAN L997

[. . . ] ScreenManager Adjustments and Settings 3-3. MAKING USE OF USB (Universal Serial Bus) This manual is checked under the browser settings shown below. Text size can change for another one through browser setting. Microsoft Internet Exproler: Text size: Medium Encoding: Western European 8. [. . . ] Set the PC's power saving settings. Select "VESA DPMS" from the <PowerManager> menu. [Power Saving System] PC Operation Monitor Operation Power Indicator Blue Yellow STAND-BY Power saving SUSPEND Power saving OFF [Power Resumption Procedure] Operate the mouse or keyboard to return to a normal screen. Digital Input This monitor complies with the "DVI DMPM". [Procedure] 1. Set the PC's power saving settings. Select "DVI DMPM" from the <PowerManager> menu. [Power Saving System] PC Operation Monitor Operation Power Indicator Blue Yellow Power saving Power saving [Power Resumption Procedure] Operate the mouse or keyboard to return to a normal screen. 5. ActiveShot Function When two PCs are connected to the monitor, ActiveShot (Picture in Picture) function allows you to display both screen images on the Main window and Sub window at the same time. About connecting two PCs to a monitor, See Connecting Two PCs to the Monitor. Operation To display/close the Sub window ON: Press Input Signal Selection Button on the control panel for 2 seconds. OFF: Press Input Signal Selection Button again for 2 seconds. Selecting "Off" on the <Picture in Picture> menu will also close the sub window. q To switch the image of main and Sub window Slightly pressing the Input signal selection button (Signal 1-2) switches the signal of Main window and Sub window. The ActiveShot function cannot be used in the following cases. r Using ActiveRotationII function. r q q Being in "External" mode of FIneContrast mode. When using the ActiveShot function, some animated images may flicker. 5-2. Sub Window Settings Display Mode <Standard> and <Clip> modes are available for displaying the Sub window (refer to following figures) for displaying the Sub window. The mode is set on the <Picture in Picture> menu of ScreenManager. [Example] <Standard> Mode Displaying the screen image in full screen with reducing the image size. <Clip> Mode Displaying a certain part of the screen image without reducing the image size. <Standard> Mode Displaying the screen image in full screen with reducing the image size in the Sub window. Select <Standard> mode on <Picture in Picture> menu of ScreenManager. To select the size ¡ Select <Window Size>. This sets the window size from "Large" (approx. After selecting the size, the actual Sub window size depends on the input signal. q To adjust the position ¡ Select <Window Position>. This adjusts the position of the Sub window. Select <Window Position> and adjust the position by using the up, down, right and left buttons. To set the Contrast ¡ Select <Window Contrast>. This controls the brightness for the each color (red, blue and green) at the same time. Select <Window Contrast> and adjust by using the right and left buttons. The contrast of sub windows also can be adjusted on the FineContrast menu. Pressing right or left control buttons with displaying the Sub window allows you to display the FineContrast menu. q <Clip> Mode Displaying a certain part of the screen image in the Sub window. Select <Clip> mode on the <Picture in Picture> menu of ScreenManager. Setting up the Clipping Area ¡ Select <Clip Area> icon to set up the clipping area. [Procedure] 1. By selecting the <Clip Area> icon, the Sub window will be displayed in full screen and pink frame will appear on it. By using the up, down, right and left buttons, position the upperleft corner of the displayed frame to the the upper-left corner of a desired clip area. [. . . ] Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed. * Bio-accumulative is defined as substances which accumulate within living organisms. ** Lead, Cadmium and Mercury are haevy metals which are Bio-accumulative. Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem Videosignal, 1600 Punkte x 1200 Zeilen, RGB analog, 0, 7 Vp-p und mindestens 75, 0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast. ) Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. [. . . ]