User manual EIZO FLEXSCAN S2000

[. . . ] PRECAUTIONS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer/Power Saving Settings 2-5 Screen Size Selection 2-6 Power Indicator/EIZO Logo Display Setting 2-7 Locking Buttons 2-8 Setting Adjustment Menu Display 2-9 Viewing Information/Setting Language 2-10 Resumption of Default Setting Important Please read this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Chapter 4 Troubleshooting Chapter 5 Reference 5-1 Attaching an Arm (Option) 5-2 Cleaning 5-3 Specifications 5-4 Glossary 5-5 Preset Timing How to Setup Please read the Setup Manual (separate volume SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mondatory action that must be followed. Copyright© 2006 EIZO NANAO CORPORATION All rights reserved. [. . . ] · The FineContrast mode cannot be changed during color adjustment. Set the FineContrast mode in advance with / . · Wait 30 minutes or more from monitor power on before starting the color adjustment. · Choose "Reset" in the <Color> menu to revert to the default settings (factory settings) of hue of the color mode selected. · The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. Make fine color adjustment visually when matching colors on multiple monitors. * These items can also be set or adjusted with the FineContrast menu. Menu Brightness Description To adjust the full screen brightness as desired NOTE Adjustment range 0 to 100% · You can also adjust the brightness by pressing or button while the adjustment menu is not displayed. Temperature To select a color temperature 4000K to 10000K in units of 500K (including 9300K). Default: Off (natural color of the panel). NOTE NOTE · The Adjustment menu and the FineContrast menu cannot be displayed at the same time. · Adjustable functions vary depending on the type of FineContrast mode. · The values shown in the Kelvin (K) are available only as reference. Gamma To set a gamma value NOTE 1. 4 to 3. 0, Fixed · Digital signal input is recommended for gamma value setting. Set a gamma value to 1. 8 - 2. 2 for analog signal input. · Only when selecting "Custom" in the fine contrast mode, "Fixed" is available. Saturation To adjust color saturation ­100 to 100 Setting the minimum (­100) turns the image to a monochrome screen. Attention · This function does not enable to display every color gradation. Hue To produce a desired skin color, etc. Attention ­100 to 100 · This function does not enable to display every color gradation. Chapter 2 Settings and Adjustments 15 Menu Gain Description Adjustment range To adjust red, green, and 0 to 100% blue to a desired color tone Adjust the respective brightness of respectively red/green/blue to make a desired color tone. Display an image with white or gray background for adjustment. NOTE · Values shown in percentage are available only as reference. 6 Colors To adjust <Hue> and <Saturation> in Red, Yellow, Green, Cyan, Blue, and Magenta respectively Hue: ­100 to 100 Saturation: ­100 to 100 Reset To reset the color settings of the selected FineContrast mode to the default settings To set/adjust color (1) Choose <Color> from the Adjustment menu, and press . (2) Select a desired function from the <Color> menu, and press The selected function menu appears. . . (3) Adjust the selected item with The adjustment is completed. / / / , and press 16 Chapter 2 Settings and Adjustments 2-4 Off Timer/Power Saving Settings Attention To set monitor power-off time [Off Timer] This function allows the monitor to automatically turn off after a specified time has passed. This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. Use this function when an image is displayed throughout the day. [Off-timer operation flowchart and power indicator status] · The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice. * ( ) shows the power indicator status. [Procedure] (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Off Timer> from the <Others> menu, and press The <Off Timer> menu appears. . [. . . ] Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (D-sub mini 15-pin - D-sub mini 15-pin, the enclesed signal cable) Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada. 35 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. [. . . ]