User manual EIZO FLEXSCAN S2100

[. . . ] PRECAUTIONS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer Settings 2-5 Screen Size Selection 2-6 Power Indicator/EIZO Logo Display Setting 2-7 Locking Buttons 2-8 Setting Adjustment menu Display 2-9 Viewing Information/Setting Language 2-10 Setting BrightRegulator 2-11 Resumption of Default Setting Important Please read this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor 3-2 Connecting Peripheral USB Devices Chapter 4 Troubleshooting Chapter 5 Reference 5-1 Attaching an Arm (Option) 5-2 Cleaning 5-3 Specifications 5-4 Glossary 5-5 Preset Timing How to Setup Please read the Setup Manual (separate volume) SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2005 EIZO NANAO CORPORATION All rights reserved. [. . . ] (It takes about 20 minutes for stable operation of internal electronic components. ) · Choose [Reset] from the Color menu to revert to the default setting (factory setting) of the color tone of the FineContrast mode selected. · The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. Make fine color adjustment visually when matching colors on multiple monitors. · You can also adjust the brightness by pressing after adjustment. Press Temperature To select a color temperature NOTE or . 4000K to 10000K in units of 500K (including 9300K). NOTE · The values shown in the Kelvin (K) are available only as reference. · The setting automatically turns "OFF" if a value under 4, 000K or over 10, 000K is set. Gamma To set a gamma value NOTE 1. 8/2. 0/2. 2 · The Adjustment menu and the FineContrast mode name cannot be displayed at the same time. · Adjustable functions vary depending on the type of FineContrast mode. · Digital signal input is recommended for gamma value setting. Saturation To adjust color saturation ­128 to 127 Setting the minimum (­128) turns the image to a monochrome screen. Attention · This function does not enable to display every color gradation. Hue To change the flesh color, etc. Attention ­32 to 32 · This function does not enable to display every color gradation. Gain To adjust red, green, and 0 to 100% blue to a desired color tone Adjust the respective brightness of respectively red/green/blue to make a desired color tone. Display an image with white or gray background for adjustment. NOTE · Values shown in percentage are available only as reference. · The <Temperature> setting invalidates this setting. The <Gain> setting returns to the default setting. Chapter 2 Settings and Adjustments 15 Menu Reset Description To reset the color settings of the selected FineContrast mode to the default settings. Adjustment range Select [Reset]. To set/adjust color (1) Choose <Color> from the Adjustment menu, and press . (2) Select a desired function from the <Color> menu, and press The selected function menu appears. . . (3) Adjust the selected item with The adjustment is completed. / / / , and press 2-4 Off Timer Settings To set monitor power-off time [Off Timer] This function allows the monitor to automatically turn off after a specified time has passed. This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. Use this function when an image is displayed throughout the day. [Off Timer System] Timer ON time (1H - 23H) "ON time" expired Monitor Operating Notice*1 Power Off Power Indicator Blue Flashing blue Off Attention Last 15 min. in "ON time" Advance *1 When is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension of operation time can be set without limitation. · The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice. [Procedure] (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Off Timer> from the <Others> menu, and press The <Off Timer> menu appears. . . (3) Select "Enable" with or . [. . . ] Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (D-SUB mini 15 pin - D-SUB mini 15 pin, the enclesed signal cable) - Stereo mini-jack cable Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada. 33 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. [. . . ]