User manual EIZO FORIS FX2431

[. . . ] Important Please read PRECAUTIONS, this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. · Please read the Setup Manual (separate volume) · The latest User's Manual is available for download from our site: http://www. eizo. com Using the special functions, such as screen size change (ex. changing the horizontal and vertical ratio of images input) for commercial purposes or for the purpose of showing in public may violate copyright laws. Product specification may vary with sales areas. [. . . ] (2) Choose [Contrast] in the [Color] menu and press . The [Contrast] adjustment menu appears. The adjustment is completed. NOTE (3) Adjust the contrast with t or u, and then press . · You cannot adjust the value if the function is not displayed, depending on the color mode selected. (See "Adjustment items in each mode" on page 27. ) · In the contrast of 50, every color gradation is displayed (PC input only). · When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the gradation characteristics, prior to the contrast adjustment. Perform the contrast adjustment in the following cases. ­ When you feel the image is dark even if the brightness is set to 100. ­ When you feel the image is bright even if the brightness is set to 0. (Set the contrast to lower than 50). Attention Toadjustthecolorsaturation[Saturation] This function allows you to adjust the saturation of the color on the monitor. Adjustable range: -50 to 50 (1) Choose [Color] in the Setting menu and press . (2) Choose [Saturation] in the [Color] menu and press The [Saturation] adjustment menu appears. The adjustment is completed. · This function does not enable to display every color gradation. . . (3) Adjust the saturation of the color with t or u, and then press 8 Chapter 3 Settings and Adjustments Toadjustthehue[Hue] This function allows you to adjust the hue. If you set the hue to a high value, the image turns greenish. Adjustable range: -50 to 50 (1) Choose [Color] in the Setting menu and press (2) Choose [Hue] in the [Color] menu and press The [Hue] adjustment menu appears. The adjustment is completed. Attention · This function does not enable to display every color gradation. . . (3) Adjust the hue with t or u, and then press Toadjustthecolortemperature[Temperature] The color temperature can be adjusted. The color temperature is normally used to express the hue of "White" and/or "Black" by a numerical value. The value is expressed in degrees "K" (Kelvin). In the same way as the flame temperature, the image on the monitor is displayed reddish if the color temperature is low and is bluish if the color temperature is high. The gain preset values are set for each color temperature setting value. 5000K 6500K The white color image is displayed reddish. The 5000K or 6000K is usually used in the printing industry. The white color image is displayed in warm white like paper white. [. . . ] * * * * Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. [. . . ]