User manual EIZO LA-121-DA

[. . . ] Thank you very much for choosing the EIZO product. Please read this User's Manual carefully to familiarize yourself with safe and effective usage procedures. [. . . ] Arm User's Manual Sheet (Compatible Screws List) Mounting Screws, 4 pcs each (For the compatible screws and monitors, refer to the `Compatible Screws List'. ) NOTE The power cable and signal cable are wired to the arm. Compatible Monitors and Desks ____________________ Monitors Supported Weight* Hole Spacing M4 2. 3 kg to 5. 2 kg 75 mm x 75 mm / 100 mm x 100 mm (VESA compatible) M4 75mm 100mm 75mm 100mm *Weight : Total weight of the monitor including the weight of the cables and optional peripherals. Desks Thickness and Depth Weight Capability Refer to right figure 20~60mm Desk 50 kg min. (recommended) More than 50mm How to attach the monitor _________________________ 1. Clamp the arm to the edge of the desk. Press the fitting against the edge of the desk and clamp with turning the knob counter-clockwise. Press against the desk 2. Attach the monitor to the arm. Use specified screws for tightening up referring to the `Compatible Screws List'. When attaching the monitor employing 75 mm x 75 mm arm mounting holes, use the inner holes on the shield plate. When attaching the monitor employing 100 mm x 100 mm arm mounting holes, use the outer holes on the shield plate. Knob Outer Holes Inner Holes Screw 3. Connect the signal cable and the power cord. Connect the power cord. To the power connector of the monitor To the signal input connector of the monitor LA-121-DA: Connect the signal cable. LA-121-DD: Connect the computer. NOTE The arm has the capability of pivoting the monitor by removing the stopper (screws) in side of the shield plate. Please consult the monitor manufacturer about the pivoting capability of the monitor. Stopper Shield Plate Specifications____________________________________ Dimension (W) x (H) x (D) 150 (5. 9) x 556 ~ 264 (21. 9 ~ 10. 4) x 206 ~ 556 (8. 1 ~ 21. 9) mm (inch) Weight Power Cord Signal Cable 3. 7 kg (8. 2 lbs. ) 125 V, 7A, 1. 2 m LA-121-DA: D-Sub mini 15 pin - D-Sub mini 15 pin, 1. 2 m LA-121-DD: DVI-D 25 pin - DVI-D 25 pin, 3. 0 m Dimensions Unit: mm (inch) NOTE The value within the dimensions drawing is only for reference, and range of motion may differ according to the installed condition. LIMITED WARRANTY EIZO NANAO CORPORATION ("EIZO") and EIZO authorized distributors warrant, subject to and in accordance with the terms of this warranty, to the original purchaser who purchased the product from EIZO or EIZO authorized distributors that this product shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase, and that, in the event of malfunction of the product during the warranty period attributable directly to defective material and/or workmanship, EIZO and EIZO authorized distributors will, at their sole discretion, either repair or replace the defective product. [. . . ] THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST THE ORIGINAL PURCHASER. THE ESSENCE OF THE PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EIZO AND EIZO AUTHORIZED DISTRIBUTORS ARISING OUT OF THIS LIMITED WARRANTY AND/OR SALES. [. . . ]