User manual ELECTRO-VOICE 2.0KW

[. . . ] 1 2 4 Step 1: Remove Screws from Loudspeaker Remove both M10 button head screws from the central mounting points on the top and bottom of the loudspeaker (Figure 4), along with two M10 flat head screws from the outer stabilizer points to be used on the top and bottom of the loudspeaker. [. . . ] Use fasteners (not included) that are suitable for the construction material of the wall or ceiling. See dimension diagrams for mounting hole patterns and dimensions. Step 4: Rotate and Tighten Screws Rotate the EVF loudspeaker to the desired angle (Figure 6), and rotate the top and bottom swivel plates to align slots with the desired outer stabilizer points. Insert M10 screws (Item B) and M10 washers (Item C) through the slots and into the outer stabilizer points. Tighten all M10 screws once desired orientation is achieved (Figure 7). Step 3: Mount the EVF to the U-Bracket Prior to mounting, ensure the M5 flat head screws used to secure the swivel plate to the U-bracket are tight, but still allow for some movement without excessive force. The user is responsible for making sure that the wall or ceiling is capable of supporting the loudspeaker. Any hardware used to suspend a loudspeaker that is not associated with Electro-Voice® is the responsibility of others. Electro-Voice® 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Bosch Communications Systems Part Number LIT000369 Rev A 08/2009 U. S. A. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other Internatonal locations. [. . . ] For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other Internatonal locations. [. . . ]