User manual ELECTRO-VOICE 715 DATASHEET

[. . . ] The rigging attachment positions on the adapter grid and enclosures allow for the the combination array to be splayed or tilted to obtain the desired sound coverage. [. . . ] The adapter grid allows for 2 options 1. Flying XLE Arrays below X-Line Very Compact Subwoofers, using the XLD Grid. Stack XLE Arrays above X-Line Very Compact Subwoofers, using the XGS-4 Groundstack. When using the Adapter Grid never exceed the rigging rating of any of the systems used with it or below it. Please use an XLE GRID and an XLVC-BGK bottom grid kit and follow instructions found on XLVC-BGK. For Groundstack Configurations - In outdoor venues when wind is present, to prevent the system from shifting or twisting with the wind, use the lag bolt holes in the base of the L-extrusions to secure the groundstack base to the mating surface. XLD Grid XLVC Subwoofers (Maximum of 2) XLE Series Loudspeakers (Maximum of 7) AGSE Adapter Grid XLVC-BGK Bottom Grid Kit (Set of 2 Hinge Bars and Swing Arms along with 8 Pins) Note: XLVC-BGK Sold Separately XLE Series Loudspeakers (Potential Maximum of 12, Depending on Array Configuration) AGSE Adapter Grid XLVC-BGK Bottom Grid Kit (Set of 2 Hinge Bars and Swing Arms along with 8 Pins) Note: Figures 3 and 4 not to scale with each other. XLVC Subwoofer (Maximum of 1) XGS-4 Groundstack Figure 3: Sample Flying Array Using the AGSE Adapter Grid Figure 4: Sample Groundstack Array Using the AGSE Adapter Grid U. S. A. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other Internatonal locations. [. . . ] For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other Internatonal locations. [. . . ]