User manual ELECTRO-VOICE 7300

[. . . ] N/DYMâ offers the power and clarity to cut through the mix. Whatever your instrument application the N/D468 is sure to be a top performer. · Designed specifically for musical instruments Flexible mechanical design for optimum positioning · Supercardioid pattern for exceptional acoustic isolation and feedback rejection · Accurate response, even in high sound pressure levels (SPL) · Rugged steel construction for exceptional durability Operation Microphone Use and Placement Please note that micing techniques are a matter of personal preference. [. . . ] · Designed specifically for musical instruments Flexible mechanical design for optimum positioning · Supercardioid pattern for exceptional acoustic isolation and feedback rejection · Accurate response, even in high sound pressure levels (SPL) · Rugged steel construction for exceptional durability Operation Microphone Use and Placement Please note that micing techniques are a matter of personal preference. These are merely guidelines to assist in the placementof the microphoneto gain optimalperformance. Usage Optimal Placement microphone cone. To Electric Guitar and Bass Guitar Amplifier Place approximately 1-2 from and at a 90° degree angle to the speaker reduce boominess, move the microphone off axis to the cone from 90° to 45°, or move mic from center of cone to either edge. Tom-Toms On double headed Toms place mic over the top of drum 1-3 and at a 45° angle to the drum surface and 1-2 in from the drum edge. On single headed Toms use above method or place mic inside Tom from underneath at a 90° angle from the center of head, 3-5 away. Snare Drum Place mic 1-3 above the heads, 1-2 in from the rim. Aim each mic at the top heads angled down about 45°. If the The low frequency response of the N/D468 microphone varies with the distance from the sound source. Known as proximity effect, maximum bass response is produced in close-up use with the microphone ¼ inch from the sound source. 3-pin, XLR-type Equivalent Output Noise . 14 dB A weighted (0 dB= 0. 00002 pascal) Warranty This product is guaranteed against malfunction from any cause for two (2) years from the date of original purchase. In addition, the Limited Warranty for the acoustic system contained in the microphone shall apply for the life of this product, defines as a period of ten (10) years from the date that the manufacture of this microphone model has been discontinued. Any and all active electronics incorporated in this microphoneare guaranteedagainst malfunctiondue to material workmanship for a period of three (3) years from the date of original purchase. This Limited Warranty does not extend to cables, connectors, or switches. 616-695-6831 or 1-800-234-6831 5 dB per division 0 330 30 Polarity: Finish: . Positive pressure on diaphragm causes Positive voltage on pin 2 ref. Non-reflecting black Materials: Grille screen . [. . . ] This Limited Warranty does not extend to cables, connectors, or switches. 616-695-6831 or 1-800-234-6831 5 dB per division 0 330 30 Polarity: Finish: . Positive pressure on diaphragm causes Positive voltage on pin 2 ref. Non-reflecting black Materials: Grille screen . [. . . ]