User manual ELECTRO-VOICE AGCD ADAPTOR GRID

[. . . ] X-Line Very Compact AGCD Adapter Grid User Instructions AGCD Adapter Grid The AGCD Adapter Grid allows for the flexibility of integrating an X-Line Compact Array with an X-Line Very Compact Array. [. . . ] These ratings account for stresses resulting from the load angles encountered in curved arrays. Consult the XLC and XLVC Rigging manuals, and/or the rigging label on the XLC or XLVC systems for the ratings when used in curved arrays. The Adapter Grid has been designed to exceed the structural ratings for the XLC and XLVC loudspeaker systems, so if the structural ratings are not exceeded for loudspeaker system within the column, the structural rating for the Adapter Grid will not be exceeded. XLC Grid XLVC Series Loudspeaker XLC Series Loudspeaker XLVC-BGK Bottom Grid Kit (Set of 2 Hinge Bars and Swing Arms along with 8 Pins) XLC Button Bar (Set of 2) XLC Swing Arm (Set of 2) AGCD Adapter Grid Note: XLVC-BGK Sold Separately AGCD Adapter Grid XLC Series Loudspeaker XLVC Series Loudspeaker XGS-3 Groundstack Figure 1: Using the AGCD for Flying Arrays Figure 2: Using the AGCD for Groundstacking These configurations are showing the maximum number of enclosures allowed, based on the measured maximum working loads of the rigging systems. They also show the proper balance for safety and acoustical performance. Other configurations are allowed at customer's discretion without exceeding the maximum loads and angles of the systems in use. For all configurations approaching these maximums, and all configurations used outdoors, use the following For Flying Configurations ­ In outdoor venues when wind is present, to prevent the system from shifting or twisting with the wind, use a secondary rigging or anchoring point to pullback or lockdown the array. [. . . ] For customer orders, contact the Customer Service department at 49 9421-706 0 Fax: 49 9421-706 265 For warranty information, contact the Service Repair department at: 616/695-6831 or 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. [. . . ]