User manual ELECTRO-VOICE APD4+

[. . . ] 100-240VAC 50/60Hz Features The APD4+ is equipped with TNC type connectors. Low loss coaxial cables are also supplied for splitter to receiver antenna jack connections. [. . . ] The LPA-500 comes complete with a variety of mounting hardware and 10 feet (3 meters) of low loss coaxial cable. A combination mounting bracket (Model No. AB-2) with 10 feet of coaxial cable is available for 1/2 wave antennas. Antennas should be placed in a location with a clear "sig nal path" to the trans mit ter. This "path" should be as short and free of obstructions as possible. Obstructions, such as walls ceilings, and metal objects, will reduce range and performance. Rack Mounted Antenna Connectors Antenna cable connections may be made to the front of the rack mounted APD4+ by installing the adaptor cables supplied. Proceed as follows: · · · · Re move the plug "knock outs" from the front panel. Install the adaptor cables from the back side of the bracket. Tighten the nut and lockwasher securely. Attach the other end of the cables to the inputs of the APD4+. Tighten securely. Rack Mounting Insert the unit into a 19" rack enclosure and secure with screws (not supplied). Front of rack antenna connec tors were designed to allow easier hook up of antenna ca bles. We do not rec om mend mount ing an ten nas di rectly to the con nec tors since per for mance may be de graded. Coax Cable For best results, it is recommended that cable losses be kept under 4 dB. [. . . ] 690419 71151-025 71150-075 71151-075 71151-100 Model FA-500 1/2 wave Flex i ble An tenna, 680-870 MHz Order No. 860031 AB-2 Combination Antenna Bracket and 10 foot (3 meter) coaxial cable with TNC connectors. [. . . ]