User manual ELECTRO-VOICE APX DATASHEET

[. . . ] To achieve this, Electro-Voice engineers created a dual element, critically spaced, low frequency line array to produce the SPL levels of a horn-loaded low/mid section. [. . . ] Then, they added the clear vocal reproduction of a critically dampened direct radiator system. The Sx600 loudspeaker employs several performance-proven EV® innovations, such as a neodymium-based mid-driver from EV X-ArrayTM concert systems, and an EV DL-Series woofer that augments response below 300 Hz, improving directivity. On the high-frequency end, an Electro-Voice DH2T compression driver, coupled to our unique VaripathTM constant directivity HF horn, produces both long throw and wide front-to-back audience coverage. And our Ring Mode Decoupling® (RMD®) technology is used throughout the Sx600 to ensure level-independent tonal response and a high level of intelligibility. O R / Historically, large venues such as indoor arenas and outdoor stadiums operating under limited budgets challenge sound system designers with serious tradeoffs. SuperSAM tilts over a 60-degree range of vertical motion (with alignment holes in 5-degree increments) and pans across 180-degrees of horizontal motion for easy and precise aiming. SuperSAM was designed for a safety factor greater than construction industry standard 5:1 and, when properly installed, will withstand significant wind and ice loading. The Sx600 system is available in both a conventional low-impedance system (model Sx600PI), or in a constant voltage distributed system, model Sx600PIX. The PIX model includes an internal 600-watt line transformer for operation on 70-, 100-, 140-, or 200-volt distributed line systems. The constant voltage option provides great flexibility when designing long-line systems for large venues such as stadiums, fairgrounds, or race tracks. Sx600 Technical Specifications Frequency Range Sx600 (-3 dB): 100 Hz­18 kHz (-10 dB): 80 Hz­19 kHz 133 dB continuous 65° nominal 65° nominal 600 watts continuous 60 watts continuous 105 dB 1. 8 kHz 200­600 Hz 90 Hz high pass filter, @ Q=1. 6 EV CPS Series SJOW cable with gland nut 70 V: 75, 150, 300, 600 W 100 V: 150, 300, 600 W 140 V: 300, 600 W 200 V: 600 W 60° vertical (5° increments) 180° horizontal Can be bolted or strapped High-density polymer Powder-coated stainless steel IEC 529 IP 44 Mil Spec 810 humidity, salt spray, temp, UV 45. 8" x 16. 9" x 12. 3" (1163 mm x 429 mm x 312 mm) Sx600PI: 80. 0 lbs (36. 3 kg) Sx600PIX: 98. 0 lbs (44. 5 kg) Sx600PI: 92. 0 lbs (41. 8 kg) Sx600PIX: 110. 0 lbs (50. 0 kg) 2400 watts peak 240 watts peak 139 dB peak Max. [. . . ] The constant voltage option provides great flexibility when designing long-line systems for large venues such as stadiums, fairgrounds, or race tracks. Sx600 Technical Specifications Frequency Range Sx600 (-3 dB): 100 Hz­18 kHz (-10 dB): 80 Hz­19 kHz 133 dB continuous 65° nominal 65° nominal 600 watts continuous 60 watts continuous 105 dB 1. 8 kHz 200­600 Hz 90 Hz high pass filter, @ Q=1. 6 EV CPS Series SJOW cable with gland nut 70 V: 75, 150, 300, 600 W 100 V: 150, 300, 600 W 140 V: 300, 600 W 200 V: 600 W 60° vertical (5° increments) 180° horizontal Can be bolted or strapped High-density polymer Powder-coated stainless steel IEC 529 IP 44 Mil Spec 810 humidity, salt spray, temp, UV 45. 8" x 16. 9" x 12. 3" (1163 mm x 429 mm x 312 mm) Sx600PI: 80. 0 lbs (36. 3 kg) Sx600PIX: 98. 0 lbs (44. 5 kg) Sx600PI: 92. 0 lbs (41. 8 kg) Sx600PIX: 110. 0 lbs (50. 0 kg) 2400 watts peak 240 watts peak 139 dB peak Max. [. . . ]