User manual ELECTRO-VOICE BB5 DATASHEET

[. . . ] The RE90L is designed to attach to the talker's clothing using the supplied clips. The electronics housing features a side clip to facilitate attachment to a belt or pocket. In addition, the extremely compact size of the RE90L is ideal for performance or house of worship applications where the microphone must remain as inconspicuous as possible to the viewing audience. copper foil for superior emi/rfi shielding. [. . . ] In addition, the extremely compact size of the RE90L is ideal for performance or house of worship applications where the microphone must remain as inconspicuous as possible to the viewing audience. copper foil for superior emi/rfi shielding. The module is enclosed in a high-strength polycarbonate resin housing to form a package that is very light-weight and extremely durable for outstanding reliability and long life. Architects' and Engineer's Specifications The microphone shall be an ultra-miniature, back-electret condenser with an omnidirectional polar pattern. The microphone shall have a frequency response from 50 to 18, 000 Hz. The product shall have a balanced output with a 100-Ohm nominal impedance. The open-circuit output voltage shall be 12. 6 mV/ pascal. The microphone capsule shall be black: the electronics housing made of black polycarbonate resin. The microphone shall be permanently connected to its electronics module with a 1. 8 m (6 ft) length of rugged, three conductor, shielded, miniature audio cable. Electro-Voice shall not be liable for any incidental or consequential damages including, without limitation, injury to persons or property or loss of use. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. Other Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Electro-Voice Wired Microphones are guaranteed against malfunction from any cause for two (2) years from the date of original purchase. In addition, the Limited Warranty for the acoustic system contained in these microphones shall apply for the life of the product, defined as a period of ten (10) years from the date that the manufacture of the specific microphone has been discontinued. Any and all active electronics incorporated in these microphones are guaranteed against malfunction due to defects in materials or workmanship for a period of three (3) years from the date of original purchase. The Limited Warranty does not extend to cables, cable connectors, or switches. [. . . ] Any and all active electronics incorporated in these microphones are guaranteed against malfunction due to defects in materials or workmanship for a period of three (3) years from the date of original purchase. The Limited Warranty does not extend to cables, cable connectors, or switches. Additional details are included in the Uniform Limited Warranty statement. [. . . ]