User manual ELECTRO-VOICE BK-42

[. . . ] The excellent transient response and smooth frequency response is gently lifted above 1, 000 Hz, lending an open, transparent detail to the recorded sound. The RE200's transducer is a true, external biased condenser element based on the RE2000 transducer design. (Most studio recording microphones are true condensers because they have greater sensitivity and stability than an electret element). [. . . ] The diaphragm is ultrathin, gold-laminated, environmentally stabilized and ultralow in mass. The electrode is a precision-cut single piece, ceramic disc layered with gold. The transducer is biased by an internal dc-to-dc converter to ensure that its sensitivity and performance is not dependent on phantom voltage. The RE200 transducer is cradled in an AcoustiDYMTM shock-mount system for mechanical isolation. The RE200's electronics are designed to operate from 12 Vdc to 52 Vdc phantom power. The RE200 is small, light and rugged, making it ideal for a variety of applications without being obstrusive. The RE200 is supplied with the model 311 microphone stand clamp, a zippered vinyl carrying pouch and a Wind TechTM 5700-12 black external foam windscreen. 1 Architects' and Engineers' Specifications The microphone shall be an external biased, condenser type with a frequency response of 150 to 18, 000 Hz. The microphone shall have a cardioid pattern with a rear response which is typically 15 dB below the front response at 1. 0 kHz. Incidental and Consequential Damages Excluded: Product repair or replacement and return to the customer are the only remedies provided to the customer. Electro-Voice shall not be liable for any incidental or consequential damages including, without limitation, injury to persons or property or loss of use. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. Other Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Electro-Voice Wired Microphones are guaranteed against malfunction from any cause for two (2) years from the date of original purchase. In addition, the Limited Warranty for the acoustic system contained in these microphones shall apply for the life of the product, defined as a period of ten (10) years from the date that the manufacture of the specific microphone has been discontinued. Any and all active electronics incorporated in these microphones are guaranteed against malfunction due to defects in materials or workmanship for a period of three (3) years from the date of original purchase. The Limited Warranty does not extend to cables, cable connectors, or switches. [. . . ] Any and all active electronics incorporated in these microphones are guaranteed against malfunction due to defects in materials or workmanship for a period of three (3) years from the date of original purchase. The Limited Warranty does not extend to cables, cable connectors, or switches. Additional details are included in the Uniform Limited Warranty statement. [. . . ]