User manual ELECTRO-VOICE CP500M

[. . . ] Electrovoice was the first to utilize the neodymium magnet structure, and it remains at the heart of our new N/DYM series of microphones. Experience the leader again for the first time and hear the difference. [. . . ] Experience the leader again for the first time and hear the difference. · Designed specifically for kick drum applications in live or studio environments · Optimized sensitivity for the high sound pressure levels found in bass drum micing · Extended low-frequency response · No additional EQ required · Rugged steel construction for exceptional durability Operation The low frequency response of the N/D868 microphone varies with the distance from the sound source. Known as "proximity effect, " maximum bass response is produced in "close-up" use with the microphone 1/4 inch from the sound source. Normal bass response is experienced with working distances greater than 24 inches. Working close to the microphone will produce a more robust sound. Close up positioning of the microphone will also reduce the potential for feedback from the sound reinforcement system. When, the bass-boost provides an increase in overall microphone output level. The mixer gain may be proportionately reduced, resulting in a reduction of the system's sensitivity to feedback caused by sound entering the microphone from the loudspeakers. Microphone Use and Placement Please note that micing techniques are a matter of personal preference. In addition, the Limited Warranty for the acoustic system contained in the microphone shall apply for the life of this product, defines as a period of ten (10) years from the date that the manufacture of this microphone model has been discontinued. Any and all active electronics incorporated in this microphone are guaranteed against malfunction due to material workmanship for a period of three (3) years from the date of original purchase. This Limited Warranty does not extend to cables, connectors, or switches. For warranty service please call us at: 616-695-6831 or 1-800-234-6831 330º 300º 0º 30º 60º 270º 90º 240º 210º 180º 150º 120º USA Canada Switzerland Germany France Australia Hong Kong Japan Singapore Mexico UK Africa, Mid-East Latin America 12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-884-4051, FAX: 952-884-0043 705 Progress Avenue, Unit 46, Scarborough, Ontario, Canada, M1H2X1, Phone: 416-431-4975, 800-881-1685, FAX: 416-431-4588 Keltenstrasse 11, CH-2563 IPSACH, Switzerland, Phone: 41/32-331-6833, FAX: 41/32-331-1221 Hirschberger Ring 45, D94315, Straubing, Germany, Phone: 49 9421-706 392, Fax: 49 9421-706 287 Parc de Courcerin, Allee Lech Walesa, Lognes, 77185 Marne La Vallee, France, Phone: 33/1-6480-0090, FAX: 33/1-6480-4538 Unit 23, Block C, Slough Business Park, Slough Avenue, Silverwater, N. S. W. 2128, Australia, Phone: 61/2-9648-3455, FAX: 61/2-9648-5585 Unit E & F, 21/F, Luk Hop Industrial Bldg. , 8 Luk Hop St. , San PO Kong, Kowloon, Hong Kong, Phone: 852-2351-3628, FAX: 852-2351-3329 2-5-60 Izumi, Suginami-ku, Tokyo, Japan 168, Phone: 81-3-3325-7900, FAX: 81-3-3325-7789 3015A Ubi Rd 1, 05-10, Kampong Ubi Industrial Estate, Singapore 408705, Phone: 65-746-8760, FAX: 65-746-1206 Av. 53390, Phone: (52) 5358-5434, FAX: (52) 5358-5588 4, The Willows Centre, Willow Lane, Mitcham, Surrey CR4 4NX, UK, Phone: 44 181 640 9600, FAX: 44 181 646 7084 12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-887-7424, FAX: 952-887-9212 12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-887-7491, FAX: 952-887-9212 www. electrovoice. com · Telex Communications, Inc. · www. telex. com ©Telex Communications, Inc. [. . . ] 53390, Phone: (52) 5358-5434, FAX: (52) 5358-5588 4, The Willows Centre, Willow Lane, Mitcham, Surrey CR4 4NX, UK, Phone: 44 181 640 9600, FAX: 44 181 646 7084 12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-887-7424, FAX: 952-887-9212 12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-887-7491, FAX: 952-887-9212 www. electrovoice. com · Telex Communications, Inc. · www. telex. com ©Telex Communications, Inc. [. . . ]