User manual ELECTRO-VOICE CPS28 EDS

[. . . ] CPS2. 8 High-Efficient, Lightweight Two-Channel Power Amplifier Key Features: · · · · · · · · · · 2 x 1100W/ 2 Ohms High Efficient Class-H Design 2 U Rack Space Detend Rear Level Controls Complete Protection Package Dynamic Limiter Phoenix Type Inputs Barrier Outputs Retrofit Signal Processing Kits Remote Power On/Off Maximum Single Channel Output 1500W, 950W, 550W Power 2, 4, 8 Ohms: (Continuous, 1 kHz) Maximum Bridged Output Power 2200W, 1600W 4, 8 Ohms: (THD = 1% , 1 kHz) Maximum RMS Voltage Swing: 72V (THD 1% , 1kHz) Power Bandwith (THD = 1% , 10 Hz - 60 kHz ref. 1kHz, half power @ 4 Ohms): Voltage Gain, ref. 1kHz: 32. 0 dB Input Sensitivity (@ rated power, +4. 7 dBu (1. 33 Vrms) 8 Ohms, 1kHz): THD at rated output power, < 0. 05% (MBW = 80kHz, 1kHz): IMD-SMPTE (60 Hz, 7 kHz): < 0. 02% DIM 30 (3, 15 kHz, 15 kHz): < 0. 01% Maximum Input Level: +22 dBu (9. 76 Vrms) Crosstalk (ref. [. . . ] Protection against: excessive HF, DC fault , high temperature, and Back-EMF as well as turnon delay, peak current and inrush current limiters. In addition to the rated output power the CPS2. 8 provides up to 30% percent headroom for a wide dynamic range on music signals. The onboard dynamic limiter ensures that the output clipping of the CPS2. 8 will not exceed a THD of 1% up to an input signal of +21dBu. Detend level controls on the rear panel provide precise (1dB-detend) and repeatable settings. Front panel LEDs indicate signal present, 0 dB, and limit. Female XLRs and Phoenix type connectors for inputs and barrier strips for outputs provide an easy rack wiring. The power on/ off function of the CPS2. 8 can be remote controlled via a 24V DC source. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]