User manual ELECTRO-VOICE EBK-1 EDS

[. . . ] EBK-1 Eyebolt Attachment Kit KeyFeatures: · · Mounting Kit for EVI-12 and EVI-15 Speaker Systems Provides Three Attachment Points for Secure Suspension of a Single Speaker Cabinet Figure 1 Lifting Eyebolt Installation GeneralDescription: The EBK-1 attachment kit contains three lifting eyebolts which screw into the inserts provided on the EVI-12 and EVI-15 speakers. [. . . ] Remove the 3/8-16 shoulder bolts from the speaker. Screw the lifting eyebolt into the insert until the shoulder has contacted the wood. Finger tighten eyebolt until correct alignment position is obtained, a maximum of one complete turn (See Figure 2). CAUTION: OVERTIGHTENING THE EYEBOLT WITH A WRENCH, SCREWDRIVER, ETC. CAN RESULT IN SYSTEM FAILURE AND INJURY. Use certified hardware rated for overhead lifting to suspend the speaker (See Figure 3). Figure 2 Rigging Point and Load Angles Figure 3 Examples of Useful Rigging Hardware StrengthRating: The EBK-1 Attachment Kit and the EVI speaker enclosure are rated for suspending only one speaker (8:1 safety factor). Hanging any additional weight from the speaker will exceed its strength rating and create an unsafe condition. Table 2 lists the strength ratings for the 3/8-inch lifting eyebolts with an 8:1 safety factor. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]