User manual ELECTRO-VOICE ELIMINATOR I FLYER

[. . . ] The Eliminator kW uses EV DL18 woofers that provide high excursion capability and resistance to overload for increased reliability and long life. [. . . ] The Eliminator kW can move tremendous amounts of air at low frequencies thanks to its combination of innovative enclosure design and powerful EV drivers. In the center of the enclosure are large slotted vents optimized for maximum low frequency efficiency. The vents are tuned to 38 Hz to deliver more low bass than most professional woofer systems. The enclosure is built of RoadwoodTM, a composite material that is void-free and unaffected by temperature and humidity. Recommended crossover frequency range is from 80-160 Hz withminimum crossover slopes of 12-dB-per-octave. Like all other vented systems, it is sensible to protect the Eliminator kW and maximize its available output by inserting an active 35 Hz subsonic filter with a minimun slope of 12-dB-per-octave into the signal chain. Frequency Response: Dimension Drawings: BlockDiagram: Performance Match: · · · · · · · Eliminator i - 15-inch two-way Eliminator i Double - Dual 15-inch two-way AC-One loudspeaker controller Dx38 digital sound system controller Q66 stereo power amplifier P2000 stereo power amplifier Eliminator kW - 301161-000 Eliminator kW Part Number: 12000 Portland Avenue South, Burnsville, MN 55337 Phone:952/884-4051, Fax:952/884-0043 www. electrovoice. com © Telex Communications, Inc. 7/2002 Part Number 38109-993 Rev A U. S. A. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. [. . . ] For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. [. . . ]