User manual ELECTRO-VOICE EV PRECISION REMOTE

[. . . ] Display red = Hi or Low Threshold of DSP compressor (yellow) and limiter (blue). Temperature control green = perfect, yellow = limit red = too warm Hi resolution input metering Name of amplifier (position, use, loudspeaker group. . . ) Channel name (loudspeaker, component, . . . ) Display for protect mode Display for dynamic limiter of amplifier Hi resolution output metering in realtime. [. . . ] Loudspeaker ouputs on barrier strip. P900 RL Featuring 2 x 450 watts into 4 ohms and 2 x 650 watts into 2 ohms, the P900RL is ideal for HF drive in multi-way systems. Loudspeaker outputs on barrier strip. P1200 RT High-impedance output for 100/70V-lines with 2 x 590 watts. The dynamic limiter circuit includes the output transformer and limits THD to 1% maximum. Loudspeaker outputs on barrier strip. P900 RT High-impedance output for 100/70V-lines with 2 x 410 watts. Loudspeaker outputs on barrier strip. Rear panel view P1200 RL Rear panel view P3000 RL RCM-24: THE DIGITAL ENGINE WITH MORE THAN 115 dB DYNAMICS FOR Remote Control · · · · Remote control of all amplifier parameters Centralized system configuration Preset and program change for different applications Control via one or multiple PCs with discretionary access control Total Supervision · All amplifier operation modes are controlled and monitored · Automated action procedures on critical operation modes are programmable · Full time supervision of loudspeaker lines for short-circuit and interrupt · Full frequency bandwidth measurement of speaker impedance and display of impedance curve showing tolerances Signal Processing · 12 filters, 2 delays, compressor and limiter per channel · RACE Processed Presets for EV speakers available In and out jacks for CAN bus on RJ45 connectors--CAT-5 cabling (includes audio monitoring signal) RS-232 interface to connect to media control systems Control port with GP in and out termination (0 to 5V) for external control, free programmable functionality (i. e. integration into safety and evacuation systems). Audio signal input on XLR connector, parallel out and DSP out on Phoenix connector. AD/DA-conversion in 24-bit resolution and 128-times oversampling (linear phase); internal word length: 48-bit. This allows the RCM-24 to offer a total dynamic in excess of 114 dB, an unequalled value for digital signal processing in power amplifiers. AUDIO PERFORMANCE, REMOTE CONTROL AND SUPERVISION AT THE HIGHEST LEVEL Electro-Voice is famous for its 75 years of experience in designing and manufacturing loudspeakers and microphones. Many audio professionals, however, don't know that it also has 50 years of design experience in power amplifiers and more than 20 years in digital audio processing. An unwavering commitment to satisfying customer needs made Electro-Voice a leading manufacturer of sound reinforcement systems for stadiums, arenas, multi-purpose venues, theatres and cinemas around the globe. Due to their sonic purity and extreme reliability, EV's amplifiers became established with top concertsound and professional installation projects worldwide. [. . . ] This allows system operation, independent of the network control in the event of a network fault. All DSP settings (filter, eq, delay, level) will stay in place. [. . . ]