User manual ELECTRO-VOICE EVID 4.2 DATASHEET

[. . . ] Model 4. 2 Compact Full-Range Speaker Key Features: · · · · · · · · · · · Line-array enhanced coverage control Organic, unobtrusive shape Strong-Arm-MountTM for easy, flexible aiming Full-bandwidth overload protection Weather resistant - Conforms to Mil Spec 810 and IEC 529 IP 34 Dual LF transducers for extended bass and greater power handling and output Ti direct-radiator HF transducer, Neodymium structure High sensitivity Magnetically shielded Zinc-plated grilles Transformer Versions Technical Specifications: Frequency Response 1(-10 dB) Power Handling Sensitivity 3 2 65Hz - 20kHz 200W Cont. [. . . ] Transformer versions are also available for constant voltage systems. 120° 80° 2. 2 kHz 2 x 4" (100 mm) 1" (25 mm) Full System Meets Mil Spec 810 humidity, salt spray, temperature and UV, and IEC 529 IP 34 splashproof ratings 100° x 90° Phoenix Connector ABS (paintable) 70V: 3. 75 W 70V/100V: 7. 5W, 15W, 30W, 8 ohm bypass 12. 2" x 6. 9" x 8. 5" (234 mm x 127 mm x 165 mm) 8. 5 lbs (3. 9 kg) 19 lbs (8. 6 kg) SAMTM, hex key Weather Resistance Swing x Rotation Terminals Enclosure Material "t" Version Wattage Taps Dim (H x W x D) Net Weight (each) Shipping Weight (pair) Included Accessories 1 2 Half Space (wall mounting) Continuous Program Rating: 3 dB greater than continuous pink noise rating (IEC-shaped pink noise with 6dB crest factor) 3 Avg: Half Space (wall mounting) 4 When mounted with long axis in vertical plane Architecture & Engineering Specs: The loudspeaker shall be a two-way system consisting of two 4" (102mm) low-frequency transducers, 1" (25mm) high-frequency transducer with a Coherent Coverage Waveguide, and frequency-dividing network installed in a vented, line array enclosure. The network shall include a passive limiter for both the low frequency and high frequency transducers. The loudspeaker system shall meet the following performance criteria: Power handling, 200 watts of EIA RS-426A continuous pink noise (6 dB crest factor); Frequency response, 65 Hz ­ 20 kHz (-10 dB from rated sensitivity); Pressure sensitivity, 89 dB at one watt, 200 Hz ­ 10 kHz at one meter; Impedance, 8 ohms nominal, 6 ohms minimum. The high frequency transducer shall drive a waveguide to evenly cover 120° horizontally by 80° vertically. The enclosure shall be molded of acrylic butyl styrene. The enclosure shall be 12. 2" (310mm) high, 6. 9" (175mm) wide, 8. 5" (216mm) deep. The finish shall be a paintable black or white. The grille shall be zinc plated, powder coated for corrosion resistance, and restrained with a safety leash. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. [. . . ]