Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELECTRO-VOICE M-218S. We hope that this ELECTRO-VOICE M-218S user guide will be useful to you.
Lastmanuals help download the user guide ELECTRO-VOICE M-218S.
Manual abstract: user guide ELECTRO-VOICE M-218SDATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] Die fein abgestimmten Entzerrungsfunktionen sind voll analog realisiert und gewährleisten dadurch maximale Verzerrungsfreiheit und einen erstklassigen Dynamikbereich. Das M-218S Modul wird einfach am Front-Modulslot eines P-Amps eingesteckt und übernimmt dann ohne große Justiermaßnahmen die Kontrolle der angeschlossenen Systemkomponenten. [. . . ] Adjusting the volume is possible via a precision 31-step level rotary control. The 24dB LR-Lo-Pass filter's crossover frequency is set to 100Hz. The integrated, patented LPN (LOW PASS NOTCH) filter, which optimally matches the transmission function of the Rx-218S cabinet, allows linearizing frequency and phase responses of the connected speaker system. A 60Hz LO-Cut filter is integrated as well. The signal-present LED lights when an audio signal with a level of at least -35dBu is present on the module or power amplifier input. P-Amps are capable of producing peak output that exceeds the stated nominal output capacity by far. Therefore the M-218S module incorporates VCP (Voice Coil Protection). VCP simulates the thermal behavior of the connected loudspeaker systems, limiting the energy that is fed to the speakers during continuous overload situations. The VCP LED indicates the activation of the VCP. Turning off the VCP-function is possible using the VCP-OFF switch on the module's printed board assembly. Setting the "MODE SELECTOR" switch on the M-218S module's printed board assembly to its "1in2"-position allows parallel operation of the power amplifier blocks A&B of a Dual Channel power amp, e. g. the P1202, bearing the advantage that the two channels use only one filter module. [. . . ] Dans ce cas, un seul module de filtre est nécessaire pour les deux canaux, et le second slot pour module reste libre.
BLOCK DIAGRAM
M-218S
Specifications M-218S Module measured in Amplifier P1202, no load, level control in center position, unless otherwise specified. Crossover Function Frequency Filter Type LO-Cut Filter Type Frequency Equalization LOW PASS NOTCH (LPN*) Gain Range Frequency Response, -3dB ref. 1kHz S/N Ratio , note module in P1202 amplifier, A-weighted High-Pass-Filter 100Hz 24dB, LR
Frequenzgang / Frequency response
12dB, Q=1 60Hz
100Hz, +12dB - . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE M-218S
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE M-218S will begin.
