User manual ELECTRO-VOICE MA-606 EDS

[. . . ] MA-606 Mixer Amplifier 60-Watt, 6 Input Mixer Amplifier Key Features · · · · · · · Balanced Microphone or Line Level Inputs All Available with 24V Phantom Power. 2 Auxilary Stereo Summing Inputs with 4 Level Sensitivity Adjustment Balanced Line Level Output for Adding Additional Power Amplifiers 24V Powered Operation Available for Emergency Power Requirements Adjustable Level Telephone Paging Input Independently Adjustable Low Power Monitor Output Integrated "Rack Ears" Allow for Rack Mounting without Additional Accessories TechnicalSpecifications: Power Output (at 1 kHz): 60 Watts Frequency Response: 50 Hz - 15 kHz, ±3 dB Input Sensitivity/Impedance, Inputs 1-4 Mic setting: 0. 3 mV/600 ohm (balanced) Inputs 1-4 Line setting: 75 mV/47kohm (balanced) Paging: -20 dBm/600 ohm (transformer isolated) Power Amp In: 1 V/10 kohm (unbalanced) Aux: 100 mV to 1V/ (unbalanced) THD (at rated output): <1% at 1 kHz Signal-to-Noise Ratio, Mic : >52 dB Aux: > 65 dB Paging: > 65 dB Power Amp In: >90 dB Line Output Level/Impedance, Preamp Output: 1 V/1 kohm (unbalanced) Balanced Line Output: 500 mV/47 kohm (unbalanced) Speaker Outputs: 4, 8, 16 ohm, 25, 70. 7 and 100-Volt Tone Controls, Bass: +-10 dB at 100 Hz Treble: +-10 dB at 10 kHz Muting: 40 dB attenuation Protection : 3 independent Slo-Blo ® fuses, primar y ac and dc Power Dissipation: 180 watts Power Supply: 108-132 V ac, 50/60 Hz Dimensions, Height: 13. 3 cm (5. 2 in. ) Width: 48. 0 cm (18. 9 in. ) Depth: 32. 0 cm (12. 6 in. ) Net Weight: 8. 5 kg (19. 0 lb) Shipping Weight: 9. 0 kg (19. 9 lb) GeneralDescription: The Electro-Voice ® MA-606 is a 60-watt, six-input mixer amplifier designed for commercial sound applications. [. . . ] There is also a 24v dc power option to operate the unit off of a 24v emergency power source. The speaker output is available at a barrier strip, which includes terminals for driving low impedance loudspeaker loads, as well as 25, 70. 7 or 100 volt distributed systems. Architects'andEngineers'Specifications: The mixer amplifier shall have six input channels, with individual mix gain controls. Input channels 1 through 4 shall be configured for either low-Z balanced microphone operation or hi-Z line level signals via switches on the rear panel. A signal present channel 1 shall trigger the muting of channels 2-6. The mute circuit shall be defeatable using a switch on the rear panel. Inputs 1 - 4 shall be available via combination female XLR / ¼" connectors. Inputs 5 and 6 shall accept either monaural or stereo sources. If a stereo source is connected, it shall be properly mixed to mono via a resistor network mounted on the input plate. There shall be a paging input that accepts a 600-ohm line-level feed from a phone system. When a signal is present at the paging input, it shall automatically mute other input sources. [. . . ] For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]