User manual ELECTRO-VOICE ND367S EDS

[. . . ] N/D367s N/DYM® Dynamic Cardioid Vocal Microphone Key Features: · · · · Classic N/DYM ® sound Smooth, controlled frequency response High N/DYM ® sensitivity Superior multistage shock mount and "Warm Grip" handle for unmatched low handling noise On/Off switch Also sounds great when used on a podium · · General Description: The Electro-Voice N/D367s is a member of a family of microphones that are manufactured with refinements that enhance the sonic smoothness, improve gain-before-feedback and provide more consistent performance with greater durability than earlier generations of N/DYM ® microphones. [. . . ] The N/D367s pop filter's unique design utilizes a specially processed AcoustifoamTM filter to minimize wind noise and vocal P-pops. This design makes the pop filter an integral part of the microphone's removable front grille assembly, allowing easy cleaning for continued top performance. Technical Specifications: Element: Dynamic N/DYM magnet structure Freq. Response, Close: 30 Hz - 22, 000 Hz Freq. Response, Far: 60 Hz - 22, 000 Hz Polar Pattern: Cardioid Sensitivity, Open Circuit 3. 0 mV/pascal Voltage @ 1 kHz: Dynamic Range: 144 dB Equivalent Output Noise: 14 dB A weighted (0 dB = 0. 00002 pascal) Polarity: Positive pressure on diaphragm causes positive voltage on pin 2 ref. pin 3 Impedance: 350 ohms balanced (low-z) Microphone Connector: 3 pin XLR type Finish: Non-reflecting black Accessories Included: Mic Stand Adapter Soft Zippered "Gig" Bag Dimensions, Length: 7. 12" (181 mm) Diameter: 2. 05" (52 mm) Shank: 0. 80" (20 mm) Net Weight: 9. 1 oz (258 g) Shipping Weight: 18. 9 oz (535 g) The N/D367s also features a noiseless on/off switch, which is useful in giving the speaker/vocalist control of their signal to the mixer. Frequency Response: Polar Response: (5 dB per division) 1000 Hz 0° 30° 60° 330° 300° 270° 90° 240° 210° 150° 180° 120° Microphone Use and Placement Please note that micing techniques are a matter of personal preference. These are merely guidelines to assist in the placement of the microphone to gain optimal performance. Usage Vocals Spoken Word Optimal Placement Zero to six inches from the windscreen, and on axis with the microphone. Five to ten inches from the windscreen, and on axis with the microphone. Standard Placement & Use Guidelines 1. Always point the microphone at the desired source of sound, and away from any unwanted sources. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/553-5992 or 402/467-5321 For technical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656 Specifications subject to change without notice. [. . . ]