User manual ELECTRO-VOICE RE410 EDS

[. . . ] RE410 Handheld Condenser Microphone KeyFeatures: · · · · · Versatile Condenser Microphone, Ideal for Both Vocals and Instruments Cardioid Polar Pattern with Excellent Feedback Rejection and Acoustic Isolation Multistage Pop Filter Eliminates Breath Pop Noises MemraflexTM Hardened Grille Screen Warm-GripTM Handle for More Comfortable Feel GeneralDescription: The Electro-Voice® RE410 is a professional quality handheld condenser microphone that was designed specifically for vocalists, yet has the versatility, smooth response, and dynamic range to make it outstanding for virtually any application. [. . . ] Close up positioning of the microphone will also reduce the potential for feedback from the sound reinforcement system. When close-talked, the bass-boost provides an increase in overall microphone output level. The mixer gain may be proportionately reduced, resulting in a reduction of the system's sensitivity to feedback caused by sound entering the microphone from the loudspeakers. Frequency Response: Polar Response: Microphone Use and Placement Please note that micing techniques are a matter of personal preference. These are merely guidelines to assist in the placement of the microphone to gain optimal performance. Usage Vocals Spoken Word Optimal Placement Zero to six inches from the windscreen, and on axis with the microphone. Five to ten inches from the windscreen, and on axis with the microphone. Standard Placement & Use Guidelines 1. Always point the microphone at the desired source of sound, and away from any unwanted sources. 2. The microphone should be located close to the sound source to minimize interference from other potential sound sources. Use the 3-to-1 rule when using multiple microphones. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/553-5992 or 402/467-5321 For technical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656 Specifications subject to change without notice. [. . . ]