User manual ELECTRO-VOICE SB122 EDS

[. . . ] SB122 12" 400-Watt Bass Module Key Features: · · · · · · Very Compact and Lightweight -Only 33 lbs/15. 0 kg Integral handle 400 Watt continuous, 1, 600 Watt peak power handling Parallel Neutrik Speakon high current input connectors Cast frame EVS12SB 12-inch high excursion subwoofer driver Integral low-pass filter -- No additional amplifier or processor needed General Description: The Electro-Voice® SB122 bass module is a very compact, lightweight subwoofer system that is designed to add bass enhancement to EV Sx and Zx Series speaker systems. [. . . ] An integral low-pass filter allows the SB122 to be directly connected in parallel with a full-range speaker for truly impressive low-end output without the need for an additional amplifier and processor. The filter is transparent below 160Hz, allowing the SB122 to be used as an independent subwoofer in biamp applications without the need to disable the internal filter. For maximum output in biamp applications and protection of the full-range system when running in parallel, a 40Hz Hi-pass (subsonic) filter is recommended. The SB122 features a convenient pole mount socket on top of the enclosure to allow a small fullrange speaker such as the Zx1 or Sx80 to be mounted on the optional ASP-1 accessory pole, resulting in a compact system than sounds much bigger than it looks. Technical Specifications: Freq. Range1 (-10 dB): 43 Hz - 200 Hz Recommended 40 Hz High-Pass Frequency: Sensitivity1 (SPL 1W/1m): 99 dB Max Calculated SPL: 131 dB Power Handling (Cont. ): 400 Watts Power Handling (Peak): 1, 600 Watts LF Transducer: EVS12SB, 12 in (305mm) Recommended Crossover 80 Hz - 160 Hz Frequency Range, Biamp: Impedance: 8 Ohms Connectors: (2) Neutrik Speakon NL4 Dim (H x W x D): 23. 1" x 16. 9" x 12. 3" (586mm x 429mm x 312mm) Net Weight: 33 lbs (15. 0 kg) Shipping Weight: 36. 4 lbs (16. 5 kg) 1 Half Space measurement. Frequency Response: Dimension Drawing: Accessories: · · · · · · 302055-000 5912525 302053-001 ASP-1, Adjustable Sub Pole PDSx, Carrying Bag TSS-1, Tripod Stand Performance Match: Q66 Power Amplifier 302013-001 302013-002 SB122, Black Finish SB122, White Finish SB122 Part Number: WARNING: The SB122 is very lightweight and has a small footprint. Do not attempt to pole-mount a speaker system larger than a Zx1 or Sx80 on the SB122. 12000 Portland Avenue South, Burnsville, MN 55337 Phone:952/884-4051, Fax:952/884-0043 www. electrovoice. com © Telex Communications, Inc. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]