User manual ELECTRO-VOICE XGS-4

[. . . ] X-Line Very Compact XGS-4 Groundstack User Instructions XGS-4 Groundstack The X-Line Very Compact Groundstack Rails feature 3 rigging attachment positions to allow for single or dual columns of X-Line Very Compact Loudspeaker Arrays to be Groundstacked and tilted to obtain the desired sound coverage. [. . . ] To switch between Single and Dual Arrays, Groundstack Rails must be rotated. Figure 1: Attaching Loudspeakers to Groundstack Rails To select the correct pin position on the bottom enclosure of your XLVC Ground Stack, find your enclosure type and specific angle, and pin the Ground Stack swing arm to that position. For safety reasons, pin only to numerically indicated positions. Left sides are shown, right are mirrored views. Figure 2: Angle Instruction for Bottom Enclosure Pin Position Figure 3: Dual Stack XLD281 Array at Front (8 Max) XS212 Array at Rear (2 Max) Figure 4: Single Stack XLD281 Array at Middle (8 Max) Figure 5: Single Stack XLD281 (5 Max) and XS212 (1 Max) Combination Array at Middle These configurations are showing the maximum number of enclosures and top enclosure angles allowed. They also show the proper balance for safety and acoustical performance. [. . . ] For customer orders, contact the Customer Service department at 49 9421-706 0 Fax: 49 9421-706 265 For warranty information, contact the Service Repair department at: 616/695-6831 or 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. [. . . ]