User manual ELECTRO-VOICE XLE181 DATASHEET

[. . . ] Electrovoice http://www. electrovoice. com/products/20. html XLE181 Products Markets Press Room Downloads Contact Search The XLE181 is a 2-way design using the same 8" neodymium LF/MB transducer as the XLD281 and the same dual ND2S HF driver combination with a 120° x 10° waveguide coverage. With less than 18 kg (40lbs) per unit the XLE offers a powerful, very compact solution for sound reinforcement applications with limited space and/or load capacity. [. . . ] Depending on music style and taste the ratio of XLD to XS212 is 3 or 4 to 1. Ground stacked one XS212 has the same heights as two XLD281 which is convenient for transportation. EV® is one of the very few loudspeaker manufacturers that has a long experience, heritage and capability for designing and building their own transducers. The DVX3120 is the latest model from the brand new DVXSeries. Forced-Air-Voice-Coil-Cooling provides very low power compression for very high SPL capability, low distortion and reliability. CP3000S Electro-Voice's new Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format. This is made possible by incorporating a highly efficient Class-H design, which results in considerably less heat being generated. This allows the overall size of the amplifier to be reduced substantially without sacrificing performance or reliability. The flagship of EV's Precision Series Compact amplifiers, the CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV's Precision Series sound. With up to 2 x 1600 watts into 2 ohms and 2 x 1100 watts into 4 ohms, it is both the most powerful model in the line and the lightest model, at only 17. 96 lbs (8. 15 kg). The CP3000S is state-of-the-art for all kinds of applications. [. . . ] Paralleled male and female input XLRs provide for easy rack wiring. P1200RL Remote control and supervision of up to 250 amplifiers via one (or multiple) PCs Central supervision of all amplifiers and connected loudspeakers State-of-the-art signal processing (Filter, Delay, Level, Dynamic) Display of the acoustical response of EV speakers in realtime (RACE) Integration with life-safety systems and control of external equipment Exceptional audio performance; extreme reliability 2 x 600 watts into 4 ohms; 2 x 850 watts into 2 ohms Loudspeaker outputs on barrier strip. Dx38 2-in/4-out loudspeaker processor 115 dB dynamic range, for highest audio performance 48-bit filter algorithms 24-bit A/D and D/A conversion Real-time control and configuration via front panel or PC interface with RACE software supplied RS-232, MIDI interfaces are standard, RS-485 bus for networking optional Contact-closure interface optional. Blue Microphones | DYNACORD | Electro-Voice | IRISnet | Klark Teknik | Midas | Telex 2 of 2 6/14/06 3:39 PM [. . . ]