User manual ELECTRO-VOICE XP200A BROCHURE

[. . . ] INPUT LEVEL LOW FREQUENCY PROFILE IN/OUT SUB LEVEL POWER/ CLIP 0 10 Electronic System Controller · Stereo full-range outputs and dual, paralleled subwoofer outputs · Full infrasonic protection for Sb120, Sb120a, Sx100 and Sx200 speakers · Crossover for Sb120 and Sb120a bass modules · Special low-frequency profile circuit provides up to 12 dB of bass enhancement for the Sb120, Sb120a, Sx100 and Sx200 · Electronically balanced XLR inputs and outputs 0 10 0 10 SPECIFICATIONS Measurement Conditions and Notes: 1. Measurements at 1, 000 Hz unless otherwise specified. [. . . ] An in/out LED indicates when the circuit is active. · · Input Level and Sub Level controls facilitate easy balancing of a complete System 200TM. A power/clip LED shows constant green with power on. If clipping occurs, the green is interrupted by flashes of red. The full-range, left and right outputs of the Xp200A feature a 40-Hz, 24-dB-per-octave high-pass filter that keeps the bass output of the Sx100 and Sx200 speaker systems very tight and clean, by eliminating excessive cone excursion caused by very low, infrasonic frequencies. The mono-summed subwoofer output incorporates 24-dB-per-octave filters that roll off response above 100 Hz and below 37 Hz for a high degree of placement flexibility and infrasonic protection for the Sb120a and Sb120 bass modules. Inputs and outputs are electronically balanced, with XLR connectors. Two paralleled sub outputs are provided, for easy connection of two subwoofer amplifiers or Sb120a powered bass modules. Outputs are compatible with both balanced and unbalanced loads. A cross-coupled output circuit automatically senses an unbalanced signal connection and increases the gain of the circuit by 6 dB to maintain the same output voltage at the power amplifier input. · · · (e) malfunction occurring at any time after repairs have been made to the product by anyone other than Electro-Voice or any of its authorized service representatives. Obtaining Warranty Service: To obtain warranty service, a customer must deliver the product, prepaid, to Electro-Voice or any of its authorized service representatives together with proof of purchase of the product in the form of a bill of sale or receipted invoice. A list of authorized service representatives is available from Electro-Voice at 600 Cecil Street, Buchanan, MI 49107 (616/ 695-6831 or 800/234-6831). Incidental and Consequential Damages Excluded: Product repair or replacement and return to the customer are the only remedies provided to the customer. [. . . ] Exclusions and Limitations: The Limited Warranty does not apply to: (a) exterior finish or appearance; (b) certain specific items described in the individual product-line statement(s) below, or in the individual product data sheet or owner's manual; (c) malfunction resulting from use or operation of the product other than as specified in the product data sheet or owner's manual; (d) malfunction resulting from misuse or abuse of the product; or ELECTRO-VOICE a MARK IV company 600 Cecil Street, Buchanan, Michigan 49107 NEWPORT, TN SEVIERVILLE, TN OKLAHOMA CITY, OK GANANOQUE, ONT. Part Number 532603 -- 9508 MANUFACTURING PLANTS AT BUCHANAN, MI © Electro-Voice, Inc. [. . . ]