User manual ELECTRO-VOICE ZX1I EDS

[. . . ] The velocity compensated port design overcomes the limitation of many small cabinet loudspeakers and enables exceptional low-frequency response without vent noise. ZX1i installation is incredibly simple with the included QuickSAM mounting system. [. . . ] An optional weatherized input panel cover with a gland nut is available for additional protection. The ZX1i's long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low-frequency performance with exceptional reliability. A sophisticated crossover network integrates it with the DH2005, a 1. 25" voice coil true compression driver for maximum output with extended frequency response. Fullbandwidth overload protection is provided for reliable, long term operation without audible effect. TM Technical Specifications: Freq. Hipass Frequency: 40 Hz Axial Sensitivity1 (90°): 94 dB (1W/1m) (100°): 92 dB (1W/1m) Max Calculated SPL (90°): 123 dB (100°): 121 dB Horizontal Coverage: 90° or 100° Vertical Coverage: 50° or 100° Enclosure Rotation: +/-35° Enclosure Sweep: +/-45° Rated System Power: 200W Cont. 2, 400W Prog. , 800W Peak LF Transducer: EV8L, 8 in (203mm) Driver HF Transducer: DH2005, 1 in. (25. 4mm) Exit Compression Driver Crossover Frequency: 1. 7 kHz Nominal Impedance: 8 Ohms Minimum Impedance: 6 Ohms "T" Version Wattage Taps: 70V - 6, 12. 5, 25, 50, 100, 8 Ohm bypass 100V - 12. 5, 25, 50, 100, 8 Ohm bypass Connectors: 4-Pin Phoenix Connector Enclosure Material: High Impact Polymer Suspension: Integrated QuickSAMTM Heavy-Duty Strong-Arm Mounting Bracket Grille: Polyester Powder Coated, 18GA Galvanized Steel Dim (H x W x D): 451mm x 282mm x 263mm (17. 75" x 11. 12" x 10. 35") Net Weight: 8. 4 kg (18. 5 lbs) without Transformer 10. 4 kg (23. 0 lbs) with Transformer Shipping Weight: 10. 2 kg (22. 5 lbs) without Transformer 12. 3 kg (27. 0 lbs) with Transformer 1 2 Half Space Measurement. IEC Pink Noise, 6 dB Crest Factor. ZX1i Series Full Range Loudspeaker ZX1i-90 Frequency Response & Impedance: ZX1i-100 Frequency Response & Impedance: Beamwidth: Beamwidth: Horizontal Off Axis Frequency Response: Horizontal Off Axis Frequency Response: Vertical Off Axis Frequency Response: Vertical Off Axis Frequency Response: Engineering Data Sheet Horizontal 1/3 Octave Polars, ZX1i-90: Vertical 1/3 Octave Horizontal 1/3 Octave Polars, ZX1i-90: Polars, ZX1i-100: Vertical 1/3 Octave Polars, ZX1i-100: Dimension Drawings: Architectural and Engineering Specs: The loudspeaker shall be a two-way system consisting of one 8"" (102mm) lowfrequency transducer, a 1. 25" titanium diaphragm true high frequency compression driver with rotatable horn and a frequency dividing network installed in a vented enclosure. The network shall include a full range passive limiter for total system protection. The high frequency compression transducer shall drive a horn to evenly cover a pattern of either 90° by 50° or 100° by 100°. The horn shall be rotatable to allow for horizontal or vertical mounting of the cabinet. The enclosure shall be molded of high impact polystyrene. Top View The finish shall be a paintable black or white. The grille shall be zinc plated, powder coated for corrosion resistance, and equipped with both hydrophobic cloth and acoustic foam. [. . . ] This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances. ZX1i Part Numbers · · · · · · · · 301851-001 - ZX1i-90, 90° x 50° Horn, Black Finish 301851-002 - ZX1i-90W, 90° x 50° Horn, White Finish 301851-003 - ZX1i-100, 100° x 100° Horn, Black Finish 301851-004 - ZX1i-100W, 100° x 100° Horn, White Finish 301852-001 - ZX1i-100T, 100° x 100° Horn, Black Finish, Transformer 301852-002 - ZX1i-100TW, 100° x 100° Horn, White Finish, Transformer 301852-003 - ZX1i-90T, 90° x 50° Horn, Black Finish, Transformer 301852-004 - ZX1i-90TW, 90° x 50° Horn, White Finish, Transformer Performance Match · D170180 · D170261 CPS2T, 120V Power Amplifier, 2 x 600W CPS2. 8, 120V Power Amplifier, 2 x 800W AB-ZE, Array Bracket Kit for 2 or 4 ZX1i or EVID Systems, Black TC-ZX1i, Terminal Cover with Gland Nut Accessories · 301918-001 · 301955-001 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. [. . . ]