User manual ELECTROLUX Z7310

[. . . ] such damage is not covered by the warranty. Never use the vacuum cleaner without its filters. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. [. . . ] Mains cable Cable rewind button Power outlet for the use of power driven tools* Mechanical Classic Long Performance s-bag® full indicator* Electronic Classic Long Performance s-bag® full indicator* and filter full indicator* Hose connection Cover release catch for Classic Long Performance s-bag® compartment Accessory compartment On/off button Parking position for tube and nozzle when in use Storage slot for tube and nozzle when not in use Power booster suction control regulator Blowing outlet* Some models, push locking catch to dismantle). Extend the cable and connect to mains, ensuring the cable is not twisted before use. Textiles on furnitures/carpeted stairs in horizontal mode: use the Textile Turbo nozzle with nozzle front down (35). Textiles on furnitures/carpeted stairs in vertical mode: use the Textile Turbo nozzle with nozzle front up (36). S-bag® indicator and changing the s-bag®: For peak performance the Classic Long Performance s-bag® should be changed when full. The mechanical s-bag® indicator window will gradually turn red when filling and completely red when full. The electronic s-bag® indicator window will light up when full. If the dust bag should get broken in the cleaner, take cleaner to service centre for cleaning. The s-bag® full indicator may also signify that the bag is blocked (occasionally caused by very fine dust) which will cause loss of suction and may result in overheating. the original filtering performance is now restored. Replace the unit back into the cleaner and close cover ensuring it is properly fastened. The blowing outlet can be used for drying damp shoes or clearing leaves etc: 49. Insert the hose into the blowing outlet until the catches click to engage. It has two modes, horizontal and vertical, by adjusting the nozzle front cover. Precautions: Only use the nozzle on carpets with a pile depth of under 15 mm. Do not use on animal skins or rugs with long fringes. To avoid damaging your carpet, do not keep nozzle stationary whilst brush is rotating. Do not pass nozzle over mains cable and switch off nozzle immediately after use. [. . . ] Do not pass nozzle over mains cable and switch off nozzle immediately after use. Disconnect from mains and remove entangled threads from brush by snipping with scissors. To avoidblockagesandmaintainsuctionefficiency, thefloornozzles should be cleaned regularly using the hose handle. [. . . ]