User manual EMERSON CKS1862

[. . . ] Dual Alarm AM/FM Clock Radio with SmartSet ® Automatic Time Setting System and Sure Alarm (U. S. 6, 567, 344) OWNER' MANUAL S CKS1862 Visit our web site at www. emersonradio. com CKS1862_110606. p65 24 6/11/2006, 9:47 CAUT I ON TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. C AU T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated ` dangerous voltage' within the product' enclosure s that may be of sufficient magnitude to constitute a risk of electric shock to persons. ! The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (ser vi ci ng) instr ucti ons in the liter ature accompanying the appl iance. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The Caution Marking maybe located at the bottom enclosure of the apparatus. IMPORTANT SAFETY INSTRUCTIONS 1. ) Read these instructions. 2. ) Do not use this apparatus near water. [. . . ] The display will change from the correct time to the Alarm 1 or Alarm 2 wake up time. 2. ) While holding the ALARM 1 or ALARM 2 setting button, depress either the SET (Up) or SET (Down) button to move the display ahead or back to your desired wake up time. 3. ) W hen the desired wake up time appears on the display, release the SET (Up) or SET (Down) buttons. s. Note: Be sure that you have set the wake up time correctly by observing the AM indicator. If the AM indicator is ` On'the wake up time is "AM". If the AM indicator is ` , the wake up time is "PM". Off' 4. ) When the desired wake up time (AM or PM) appears on the display, release the ALARM 1 or ALARM 2 setting buttons. 11 CKS1862_110606. p65 11 6/11/2006, 9:47 Selecting The Alarm Mode Your SmartSet® clock radio allows you to select from among three different alarm operation modes for either alarm. The alarm modes are: · Everyday ­ The alarm will turn on all 7 days. · Weekdays only ­ The alarm will only turn on Monday through Friday; · Weekends only ­ The alarm will only turn on Saturday and Sunday. To check the Alarm Mode setting for Alarm 1, depress the ALARM 1 setting button. The display will show the Alarm 1 wake up time and the "Day Of The Week" indicators will show you the alarm mode which is selected. On' · If all 7 indicators are ` , the Everyday mode is selected. · If only the Monday through Friday indicators are ` , the Weekdays only mode is selected. On' · If only the Saturday and Sunday indicators are ` , the Weekends only mode is selected. On' To change the Alarm Mode setting for Alarm 1, hold the ALARM 1 setting button and press the ALARM MODE button until the Day indicators show the desired mode setting, Weekdays only, Weekends only, or Everyday operation. Release the ALARM MODE and ALARM 1 setting buttons and the display will return to the correct time. Follow the same procedure to select the desired Alarm Mode for Alarm 2 if necessary. Checking The Wake Up Times And Alarm Mode Whenever you want to check the wake up time or the alarm mode settings, simply press either the ALARM 1 or ALARM 2 setting buttons. The display will change from correct time to wake up time and the day indicators will show you the alarm mode which is currently selected. Release the ALARM 1 or ALARM 2 setting buttons to return to correct time. 12 CKS1862_110606. p65 12 6/11/2006, 9:47 Listening To The Radio 1. ) Set the Band selector to the desired band, AM or FM. 2. ) Set the VOLUME control to a low setting. 3. ) Press the RADIO ON/OFF button to turn the radio ` . On' 4. ) Select your desired station with the TUNING control on the right side of the cabinet. [. . . ] When the correct Month and Date appear on the display, release the buttons. 5. ) Depress the TIME button and the SET (Up) button to set the display to the correct Time. Be sure to confirm that you have set the time correctly to ` AM'or ` PM'by observing the AM indicator. 6. ) After you set the time, reconfirm that the Day, and Month/Date displays are still correct. [. . . ]