User manual EMERSON CR202EM8

[. . . ] READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. CLEANING - Unplug TV from the wall outlet before cleaning. [. . . ] - When selecting digital channel 12-1 Be sure to press [­/ENT] before entering the minor channel number. The volume bar will be displayed at the bottom of the TV screen when adjusting the volume. When you select a channel larger than 100, press [+100] first. Then use [the Number buttons] to press the lower 2-digit numbers. About digital TV broadcasting: With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality. Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network. Although, you cannot watch the high definition TV (HDTV) program, the unit converts the HDTV signal down to the standard definition TV signal. You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit. When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. The following TV screen is displayed while switching the mode. 1 channel number 2 broadcast station 3 program title 4 audio language Press [AUDIO] repeatedly to cycle through the available audio languages. ("OTHER" is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. KABC CH 95-03 A Day of Memories ENGLISH 1/3 A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the industry's advertising revenues. To use the video or S-video input jack on the rear of the unit, select "VIDEO1". To use the video input jack on the front of the unit, select "VIDEO2". You can display the currently selected channel or other information such as the audio mode on the TV screen. When the program guide consists of more than 6 lines, use [VOL X/Y] to scroll. "No description provided" is displayed when the program guide is not provided. While the program guide is displayed, the closed caption function is interrupted. The current channel number is displayed at the topright corner of the TV screen. The information display will automatically disappear in a few seconds when the closed caption is on. The sleep timer can be set to automatically turn off the unit after an incremental period of time. [. . . ] Color errors occur when there is any excess magnetism close to the unit. This circuit is designed to operate once when the unit is first plugged in. If you see minor color errors on the TV screen, unplug the unit for approximately 30 minutes. When you plug the unit again, the degaussing circuit will operate to clear errors. [. . . ]