User manual EMERSON EWC13D4

[. . . ] OWNER'S MANUAL "EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP. , PARSIPPANY, NEW JERSEY, U. S. A. " COLOR TV/DVD EWC13D4 (13 inch) INSTRUCCIONES EN ESPAÑOL INCLUIDAS. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. registered mark. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1-800-256-2487. Or visit our WEB SITE at http://www. funai-corp. com Please read before using this equipment WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. ­ 20 ­ EN 0C28 TITLE MENU DVD-V 1 Press TITLE on the remote control. 2 If the feature is not available, may appear on the TV screen. symbol STEP BY STEP PLAYBACK DVD-V 1 During playback, press PAUSE. ¡Playback will pause and sound will be muted. 2 The disc goes forward by one frame each time PAUSE is pressed. 3 Press Arrow (K/L/s/B) to select an item and ENTER to confirm selection. 3 To exit step by step playback, press PLAY. CALLING UP A MENU SCREEN DURING PLAYBACK For DVD-Vs ¡Press DISC MENU to call up the DVD menu. ¡Press TITLE to call up the title menu. FAST FORWARD/REVERSE SEARCH DVD-V CD MP3 1 During playback, press FWD g or REV h. ¡"g 1" or "h 1" appears on the screen. 2 To select another speed, repeat step1 until your required speed appears on the screen. ¡For DVDs, fast forward/reverse search speed is dif- NOTE ¡Contents of menus and corresponding menu opera- tions may vary between discs. Refer to the manual accompanying the disc for details. RESUME DVD-V CD MP3 1 During playback, press STOP. ¡Resume message will appear on the TV screen. 2 Press PLAY, playback will resume from the point at which playback was stopped. ¡To cancel resume, press STOP twice. ¡If TV/DVD is turned off, resume function will be ferent depending on the disc. Approximate speed is 1(×2), 2(×8), 3(×50) and 4(×100). ¡For audio CDs, approximate speed is ×16. ¡For MP3, approximate speed is ×8 ¡When you use buttons on the TV/DVD front panel, press and hold SKIP G / SEARCH g or SKIP H / SEARCH h for a few seconds. 3 To return to normal playback, press PLAY. cancelled. ¡For MP3, playback will resume from the beginning of the track at which playback was stopped. SLOW FORWARD / SLOW REVERSE DVD-V 1 During playback, press PAUSE. 2 Press FWD g or REV h. ¡" PAUSE DVD-V CD MP3 1 During playback, press PAUSE. ¡Playback will pause and sound will be muted. 1" or " 1" appears on the screen. 3 To select another speed, repeat step2 until your required speed appears on the screen. ¡Slow forward or reverse speed varies with the disc. 2 To continue playback, press PLAY. Approximate speed is 1(1/16), 2(1/8) and 3(1/2). ¡When you use buttons on the TV/DVD front panel, press and hold SKIP G / SEARCH g or SKIP H / SEARCH h for a few seconds. 4 To return to normal playback, press PLAY. ­ 21 ­ EN 0C28 SEARCH FUNCTION TRACK SEARCH CD MP3 TIME SEARCH DVD-V CD There are three ways to begin playback on an Audio CD and MP3 at a specific track. Using the number buttons on the remote control 1 During playback, press SEARCH MODE three times (CD: twice) to display the Time Search on the TV screen. 1 Press the number buttons to enter the desired track number. ¡Playback will start at the selected track. [. . . ] Si la reproducción no empieza automáticamente, pulse PLAY. ¡Cuando reproduzca un DVD que tenga grabado un menú de títulos, el menú aparecerá en la pantalla. 5 Pulse el botón STOP para detener la reproducción. 3 Después de buscar El sintonizador se detiene en el canal memorizado más bajo. · Cuando se activa AUTOPROGRAMACION DE CA, donde no hay entrada de señal del televisor, aparecerá "NO HAY SEÑAL DE TV" en la pantalla después de terminar la búsqueda de canales. [. . . ]