Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual EMTAC CRUX LOG. We hope that this EMTAC CRUX LOG user guide will be useful to you.
Lastmanuals help download the user guide EMTAC CRUX LOG.
Detailed instructions for use are in the User's Guide.
[. . . ] Function Description
2. 1 GPS status
Fix: The fix status, No, 2D or 3D; plus DGPS. 12-Channel Signal-Level View: The Signal Level in dB-Hz of each GPS channel.
2. 2 Position
Position: The Latitude and Longitude. DOP & Speed: Fix: The Fix Status, No, 2D or 3D;plus DGPS. VDOP: Vertical Dilution of Precision.
6
2. 3 Message
In this page the window displays the NMEA messages from Trine. [. . . ] After: Read the number of data logs after the given Date1 and Time1. Between: Read the number of data logs between the given Date1/Time1 and Date2/Time. If the "Operate" is set to "Dump Record Data", then the meanings of parameters in the Range is defined as follows: Total: Read the data logs according to the given Begin and End number. Before: Read the data logs before the given Date1 and Time1. After: Read the data logs after the given Date1 and Time1. Between: Read the data logs between the given Date1/Time1 and Date2/Time2. After choosing one of the configurations, please click " Apply" button to do the action and the result will be displayed in the "Status" field and the field below the "Status" if Data" is set. Note: Please DO NOT dump too much data that will cause the errors by lack of memory. "Dump Record
9
2. 7 Download
This option is used to save data log in the \\My_Device\Trine_Data_Log, as for the data format, please reference to the appendix section for more details. Set Param region can be set with the given parameters: By: All Data: Download the all data logs. Sequence no. : Download the logs from the given " Begin" value to the given "End" value. Before the date: Download the logs before the given date1 and time1. After the data: Download the logs after the given date1 and time1. Between the data: Download the logs between the given data1, time1 and the given date2, time2. The date1, date2 format is set as "yymmdd", and the time1, time2 format is set as "hhmmss". Note: Please BE SURE that the download button is enabled to before using this option.
10
2. 8 The About
a
b
The about window shows the information of a. firmware version of Trine.
11
3. Advance
Trigger Setting for Data Log Read/Write 3. 1 GPS positioning condition
3. 1. 1. select "Positioning Condition(160, 3)" 3. 1. 2. Set "Fix Status" , "HDOP" 3. 1. 3. Fix Status:0:Not Set , 1:Set Fix status change trigger. HDOP:0:Not Set , 0. 1 - 25. 5 HDOP change trigger set.
3-2. select "Accumulated Condition(160, 4)" 3-2-2. [. . . ] Velocity;Stall Velocity Threshold Value: 0:Not Set , 0. 1 6553. 5 Km/hr set. Elapse Time;Stall Elapse Time: 0:Not Set , 1 - 255 secords set.
3-6. Turn All Trigger Off, The Log ID and DGPS set remained
3-6-1. select "Turn All Trigger Off(160, 8)" 3-6-2. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE EMTAC CRUX LOG
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual EMTAC CRUX LOG will begin.
