User manual EMTEC DVB-T TUNER S815

[. . . ] Exe, where D refers to the letter assigned to your CD drive. - You will be asked to choose the setup language, as follows : Choose a language and then click OK. You will now be asked to accept the End User License Agreement. Be sure to check the I accept the terms in the license agreement box, then click on Next. [. . . ] Once the software has finished being installed, you will be asked to restart the computer. Remove the cap from the DVB-T dongle, locate a free USB port on your computer and plug in the dongle. Once the computer recognises the new hardware, the New Hardware wizard will begin. As the DVB-T is a Hi-Speed device, you may receive the following message if it is plugged into an older USB 1. Simply click on the X in the top right-hand corner of this message. You will see several messages during the installation of the DVB-T dongle. Please be patient, as this process make take a few minutes. Double-click on the Savvy TV icon, which appears on your desktop. the TV display panel and control panel will appear (See next page). Note that the software may take a few seconds to open. First click on the Source tab and make sure that your hybrid tuner is chosen as the primary source. Note that if you are currently in Wallpaper mode, you will need to choose the Window Mode option to return to normal viewing mode. There are several ways to navigate whilst in Teletext mode. The left/right arrow keys can be used to move through the teletext pages one at a time. If subpages are available, then the up/down cursor keys can be used to navigate through these. In the above picture, for example, the page is 100, and the subpage is 08. The page number display field can also be typed into directly. After the page number is typed, click on the Go to Page button in order to go to that page. The four coloured buttons (red, green, yellow and blue) can be used at hotkeys to go directly to the coloured links which appear at the bottom of the teletext display screen. The action button enables you to choose any page number displayed within the screen. once the action button has been pressed , it will change colour. You can then use the up/down arrow keys to navigate within the screen. [. . . ] Once the page you would like to go to is highlighted, press the action button again to go to that page. This means that you can get instant access to the list of programmes available to you. This will open up the following screen: You will find a list of channels down the left-hand side. These can be scrolled through, using the up and down arrows above and below the list. [. . . ]