User manual EMTEC DVB-T TUNER S820

[. . . ] Minimum System Requirements - USB port - DirectX 9c - Windows 2000/XP - Pentium IV 1, 4GHz ou équivalent - 256MB RAM - DirectX 9c compatible sound card - DirectX 9c compatible video card - 32MB HDD space (installation only) Package Contents - DVB-T dongle - Software CD - Quickstart guide - Antenna * Please note that the antenna has a magnetic base and should not be placed near any items that can be affected by magnetic fields, for example, computer or TV screens, floppy disks, or credit cards. Remove the cap from the DVB-T dongle, locate a free USB port on your computer and plug in the dongle. Once the computer recognises the new hardware, the New Hardware wizard will begin. As the DVB-T is a Hi-Speed device, you may receive the following message if it is plugged into an older USB 1. [. . . ] Now click on the Channels tab, choose your region from the drop-down list, and click the magnifying glass to scan for available channels. Once the scan is complete, click the tick icon at the bottom-right of the Settings screen. Once the software has finished being installed, you will be asked to restart the computer. Use the channel up/down buttons, or the keyboard up/down cursor keys, to move through the channels one by one. Alternatively you can type a channel number directly. Use the volume up/down buttons, or the keyboard right/left cursor keys to increase/decrease the volume. Recording There are 3 ways to record: Live Recording To record what is currently being shown on the screen, press the record button. TimeShift Recording NOTE: TimeShift recording is very useful when you are watching a program and may have to leave just for a moment, for example if the phone rings. This will start timeshifting the program currently being shown. The computer may now be left unattended. When you return to the computer, you can use the forward wind or rewind buttons to search within the recording. Use the play button to play or the pause button to pause. None of these buttons will stop the recording. This will open the Schedule Record window, as follows: The information you require to record the proram will already be entered. However, the following information can be edited manually: Display as Wallpaper · Start and end times of the recording (24 hour format) · It can be restored from the Windows taskbar (See note below). full Screen This option will display the TV full screen , and remove the control panel. Click anywhere on the screen to return to normal viewing mode. Normal viewing mode can be restored from the Windows taskbar (see note below). Watching Recorded Programs Press the open video file icon, which will open up a browser window, allowing you to search for recorded mpg/mpeg files. This method allows you to view both scheduled recordings and live recordings, as well as other mpeg files. Both the display screen and the control panel can be restored from the Windows taskbar as follows: - Right-click on the Sawy DTV tab in the Windows taskbar. Note that if you are currently in Wallpaper mode, you will need to choose the Window Mode option to return to normal viewing mode. [. . . ] The four coloured buttons (red, green, yellow and blue) can be used at hotkeys to go directly to the coloured links which appear at the bottom of the teletext display screen. The action button enables you to choose any page number displayed within the screen. once the action button has been pressed , it will change colour. You can then use the up/down arrow keys to navigate within the screen. [. . . ]