User manual EMTEC MP4 PLAYER C235

[. . . ] Some safety precautions and guidelines must be followed. To avoid damage, make sure that you do not drop, smash or mis-use the device. Operate the device in acceptable temperature. Make sure that you only use the player where temperature between 0 °C ~ 40 °C. [. . . ] It is advised that you charge the player, or it may power off automatically during use. : Low· Battery · Please· · Recharge Hotkey ( ) Pressing the Hotkey during playback provides a shortcut to users to set their preferences. Press the hot key ( ) for the first time, Shuffle mode (ON or OFF) can be set as illustrated below: Press the hot key ( illustrated below: ) for the second time, it changes to Repeat mode (One, Off or All) as 10 Press the hot key ( ) for the third time, it changes to the EQ mode (Normal, Pop, Rock, Jazz or Classic) as illustrated below. CONNECTING TO A PC Connect C235 to PC Connect the supplied USB cable to the USB port on player and to an available USB port on your computer. Warning: Please keep it connected until this player is safely removed from your PC after uploading or downloading is completed. Otherwise, the player may be subject to fatal failure or data loss. 11 BUILD MUSIC LIBRARY After turning on the device, it will go through a process of building music library. It is a process of updating and reorganizing the database as illustrated below: FORMAT THE DEVIC E (Formatting is not required unless data corruption has occurred) Windows 2000 For Window ME or 2000, connect the device with PC, right click the removable drive in "My Computer" and select "Format" . In MTP mode For Window XP, it must be done in Windows Media player 10, click the button as the figure below: 12 To play your video clip in the player, you have to install the conversion software to your pc. Please follow the below instruction to install the software Download and install the software & required library 1. Insert the included CD and the installation procedure starts automatically. Follow the on-screen instruction to proceed the installation. The install shield wizard lead yon to install the required applications. Please read the instruction carefully the confirm your option. After the installation is completed, a short-cut will be shown on the desktop. 13 Way to convert a video clip 1. Launch the application by double click the short-cut on the desktop. 3. Click "Add File" to add the source file(s). You can choose to save the converted file to the connected player, or click the folder icon at the bottom to choose the destination folder. 5. Click "Start!" to start the encoding. 14 6. After the encoding, you may find the converted file(s) in the target location. 7. Copy/Sync the converted file(s) into the device. ( Please refer to the section of "General and DRM File Transfer") Note: Actual Interface of the software will subject to the changes on software version. 15 GENERAL AND DRM FILE TRANSFER 16 Windows XP (MTP mode): 1. Double click "My Computer" in Windows, you will find a new drive . Audio Player 2. Drag your media files to "Media" folder and other files to "Data" folder (Windows Media Player 10 installed) or "Internal Storage" (Windows media player11 installed). Note: 1. You can also upload the files from the device to your PC. During uploading / downloading, keep USB cable connected to your PC. [. . . ] Make sure you have Windows XP and Windows Service Pack 1 installed on your computer before proceeding. You can download Windows Media Player 10 at www. windowsmedia. com. Check if the earphone plug is connected firmly. The songs maybe corrupted, please download other songs and try again. [. . . ]