User manual EMTEC UNIVERSAL REMOTE CONTROL H360

[. . . ] Technical manipulations of the product or any changes to the product are forbidden, because of security and approval issues. Please take care to set up the device correctly ­ consult your user guide. Children should use the device only under adult supervision. avoid the following: Strong mechanical wear and tear High temperature Strong vibrations High Humidity Please also respect the additional notes in the various user guide chapters. [. . . ] The equivalent key functions can be found on your remote by using the Mode and Setup keys. Assuming your Combo device is a DVD/VCR and its code is programmed under DVD Mode: press and hold the DVD Mode key for more than one second to send the DVD key command, Quickly press and release the S key followed by pressing and releasing the DVD Mode key to send the VCR key command. This method can be applied similarly to all Combo devices (e. This feature is not supported by all codes. Volume/Mute Control and Punch-Through Feature:- This remote allows you to select which Mode controls your Volume/Mute keys. If the programmed "Visual" code has no Volume/Mute operation of its own then those keys will punch-through control to the TV Mode device without needing to change to TV Mode. Setting Volume/Mute Control and Punch-Through - Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function either in the programmed code or learned otherwise the Volume/Mute keys will do nothing. TV :- This routine will set all Modes to punchthrough to any one chosen Mode for Volume/Mute key control without the needing to change to that Mode. Using the Up/Down keys, navigate to "System Setup". Press and release desired Mode key (TV, VCR, DVD, etc. "Please Wait" will be displayed briefly followed by "Success" and the remote will exit Setup and return to normal operation. All Modes will now punch-through to your chosen Mode for Volume/Mute control. If the chosen Mode has no Volume/Mute commands of its own, "Volume Control Error" will be shown in the display and the remote will exit Setup routine and return to normal operation. This routine will set any Mode to use only its own Volume/Mute control i. Note: before using this routine, check that the chosen Mode has its own Volume/Mute functions, either in the code or by learning, otherwise the Volume/Mute keys will do nothing. Using the Up/Down keys, navigate to "System Setup". Using the Up/Down keys, navigate to "Set Vol. Press and release desired Mode key (TV, VCR, DVD, etc. ) to be disabled for Volume/Mute punch-through control. "Please Wait" will be displayed briefly followed by "Success" and the remote will exit Setup routine and return to normal operation. The chosen Mode will now use its own Volume/Mute control. This routine will reset Volume/Mute control back to its Factory default settings. [. . . ] Using the Up/Down keys, navigate to "Macro Setup". Press and release digit key 1, 2 or 3 where you want to store the Macro. "Select Macro X Mode" (where "X" is 1 , 2 or 3) is displayed. Press and release the desired Mode key (TV, VCR, DVD, etc. [. . . ]