User manual EMTEC USB STICK S450 AES

[. . . ] an encryption key is needed to access the network. NONE means it is an open system network. 5 / 14 · Input WEP / WPA Key Encryption keys can be inputted via the virtual keyboard. Press the navigational buttons to select, ENTER to input, CAPS to switch between uppercase and lowercase, <- to delete a character, -> to insert a space, shift to make more symbols available, and OK to confirm. · Wireless Address Setup A) If there is a DHCP server on your network, i. e. [. . . ] a router is equipped and its DHCP function is enabled, select DHCP IP (AUTO) to set the IP address automatically. B) Otherwise, please select FIX IP (MANUAL) to set the IP address manually. 6 / 14 Press and to select FIX IP (MANUAL), and press . Use the numerical buttons on the remote control to enter IP Address, Subnet Mask, and Default Gateway, and press to confirm. For further assistant to the above settings, please contact to the network administrator. · Test connection The testing process will take for a while, please be patient to wait. If the test is ok, the network information (Profile Name, IP address, Subnet Mask, Gateway, etc. ) will be displayed on the screen. 2. 2 Peer to Peer (Ad Hoc) Peer to Peer mode, which is also called Ad Hoc mode or computer-to-computer mode, is used to connect wireless clients directly together, without the need for a wireless router or access point. 7 / 14 · Ad-Hoc Setup Press ENTER to go to next step, press RETURN to cancel, and press PLAY to connect. 2. 3 Settings for PC The following shows an example on Windows XP Operating System. Settings might not be the same due to different operating systems and wireless network adapter/card drivers. · Choose the wireless SSID Step 1: Click on the Wireless Network Connection icon in the notification area, i. e. system tray. 8 / 14 Step 2: Click View Wireless Networks, a network list will be displayed. Step 3: Select the wireless SSID (which is set in Ad-Hoc Setup) in the network list. And click Connect. Enter the network key if it is not an open system network. The computerto-computer network will be built. In this way, you can playback and copy files via wireless network between your PC and the player without a USB or Ethernet cable. 13 / 14 Note: NTFS partitions will be read-only. 4. Troubleshooting Q1: I cannot get SSID name, the screen always displays: `Can't get any SSID!!' A: When the WLAN USB Adapter is connected to the player, it needs some time to get initialized. Please wait for about 1~2 minutes and try again. Q2: I configured everything correctly, but still cannot get the wireless network connected. A: Are you using a firewall such as Norton Internet Security, McAfee Personal Firewall, Zone Alarm, etc. or even the built-in firewall of Windows XP?(Don't forget that Service Pack 2 for Windows XP automatically upgrades your firewall and turn it on by default) If you have a firewall, it may need to be configured or have exceptions created to allow you to see and communicate with the player on the network. To test if your firewall is preventing network communication (including PING and access shared folders), try disabling it to see if you can connect. If you can connect with the firewall disabled, you may need to add the player to the `Trusted' list or configure the firewall for local intranet access. [. . . ] If you can connect with the firewall disabled, you may need to add the player to the `Trusted' list or configure the firewall for local intranet access. Worst-case, disable your firewall long enough to use the player, then enable it again when done. Q3: I'm using Windows Vista, and I cannot use the NAS function. A: Use the following commands to resolve this problem: Press Windows logo key + R. [. . . ]