User manual ENCORE ENHGS-800X4

[. . . ] ENHGS-500X2 5-Port Gigabit Switch ENHGS-800X4 8-Port Gigabit Switch User's Manual FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] Please check with your local distributors for the latest information. No part of this document can be copied or reproduced in any form without written consent from the company. Trademarks: All trade names and trademarks are the properties of their respective companies. Encore Electronics Inc. , Copyright © 2010, All Rights Reserved. Introduction The ENHGS-500X2 / ENHGS-800X4, a powerful and high-performance 5 / 8-Port 10/100/1000 Mbps gigabit Ethernet switch, is the best solution for expanding your network environment. ENHGS-500X2 / ENHGS-800X4 5 / 8-Port gigabit switch is fully non-blocking architecture and compliant with all kinds of network protocols. ENHGS-500X2 / ENHGS-800X4 supports every switching port with wire-speed performance and delivers a dedicated 10/100/1000 Mbps connection to every attached client with no bandwidth congestion issue. Gigabit speed is 10 times quicker than 100Mbps fast Ethernet connection, enabling you to save time transferring bandwidth-intensive music, video, photos, graphic, and data files. Store-and-forward switching mode promises a low latency plus eliminates all the network errors, including runt and CRC error packets. ENHGS-500X2 / ENHGS-800X4 can provide a backbone link to your switched workgroup or a server fat-pipe link. With flexible architecture, users can easily implement a wired network without bandwidth limitations. Before you start to install the switch, check the following contents in this package One ENHGS-500X2 or ENHGS-800X4 One power adapter User's manual Led Definition Please refer to the following table for LED definition: ENHGS-500X2 (5-Port switch) ENHGS-800X4 (8-Port switch) LED Power Status Steady Green Off Operation Power is on Power is off Port connected The port is transmitting/receiving data Link/ACT Steady Green Blinking Green Stations connection Connect each station to the switch by twisted-pair cable. [. . . ] Length 100 meters 100 meters 100 meters Specification IEEE 802. 3 10BASE-T IEEE 802. 3u 100BASE-TX Standard IEEE 802. 3ab 1000BASE-T IEEE 802. 3x full duplex operation and flow control Interface Uplink 5 ports / 8 ports - 10/100/1000 Mbps RJ-45 Gigabit Ethernet Auto MDI/MDI-X Auto crossover 10/100/1000Mbps Network Speed Full/Half duplex mode auto detection (1000Mbps for Full duplex only) MAC Address Table 1K MAC entries (ENHGS-500X2) 4K MAC entries (ENHGS-800X4) 104K bytes (ENHGS-500X2) Buffer Memory 128K bytes (ENHGS-800X4) 12K bytes (ENHGS-500X2) Jumbo Frame 16K bytes (ENHGS-800X4) 5V 2A CE, FCC part 15 Class B External Power Supply Certification [. . . ]