User manual ENCORE ENKVM-USB

[. . . ] A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation A USB Keyboard A USB Mouse Computers The following equipment must be installed on each computer that is to be connected to the system: · Before you begin, make sure that the power to all the devices you will be connecting has been turned off. [. . . ] Note: When using a wireless composite keyboard and mouse, its USB cable must be plugged into the ENKVM-USB's keyboard port for the Hotkeys to function. Plug the USB and video connectors of the attached KVM cables into their respective ports on the computers you are installing. Note: The ENKVM-USB by default links to the first computer you turn on. Hotkey Port Selection All Hotkey port switches begin with tapping the [Scroll] key twice, and then press the [Enter] key. Auto Scan Interval While Auto Scan running, set up the interval to "n" second intervals - where "n" is a number from 1 ­ 4. Note: The "n" stands for the number of seconds that the focus dwells on a port before switching to the other one. Replace the "n" with a number between 1 and 4 when entering this hotkey combination. Prints out the current hotkey, keyboard operating platform, and language code settings. [. . . ] Mac Keyboard Note: When using key combinations, press and release the first key, then press and release the second key. [. . . ]