User manual ENCORE ENLGA-1320

[. . . ] This document describes the Installation of network adapter. This adapter supports 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet copper interface. Moreover, the PCI interface on the Gigabit Ethernet NIC complies with PCI Local Bus, is compatible with 32-bit PCI bus. As a bus master, the NIC requests access to the PCI bus, instead of waiting to be polled. 1. 1 Features The Gigabit Ethernet PCI adapter is a cost effective, high-performance network interface card. [. . . ] Press the power button on the case of PC to turn it on. Windows ME will prompt "PCI Ethernet Controller" in "Add New Hardware Wizard" dialog box; insert driver disk bundled with "Gigabit Ethernet Network Adapter". Select "Install the software automatically" and then click <NEXT> button. Windows ME will prompt "Gigabit Ethernet Network Adapter" in "Add New Hardware Wizard" dialog box, click <FINISH> button to complete the installation. Restart the computer. Microsoft Windows NT 4. 0 1. In the "My Computers" icon, double click the "Control Panel" icon. In the "Control Panel" icon group, double click the "Network" icon. In the "Network Settings" dialog box, select the Adapter" Tab, then click "Add" button. There will be a list of network adapters. 9. Click "Have Disk" for selecting one network adapter. Insert this driver disk in drive A, enter drive and pathname "A:\Winnt4", then click the <OK> button. You will see that the "Gigabit Ethernet Network Adapter " string appears in the "Select OEM Option" dialog box, and click the <OK> button. Select the connection type in the "Gigabit Ethernet Network Adapter", and click <OK>. Follow the screen instructions and finish the rest of installation procedures. Restart your computer. Microsoft Windows 2000 1. Press the power button on the case of PC to turn it on. Windows 2000 will prompt "Welcome to the Found New Hardware Wizard" in "Found New Hardware Wizard" dialog box, click <NEXT> button. Windows 2000 will prompt "Ethernet Controller" in "Found New Hardware Wizard" dialog box, select "Search for a suitable driver for my device" and then click <NEXT> button. Select "Specify a location" from "Optional search locations:" of "Found New Hardware Wizard" dialog box, then click <NEXT> button. Insert driver disk bundled with "Gigabit Ethernet Network Adapter". Enter the driver pathname "A:\" then click the <OK> button from "Found New Hardware Wizard" dialog box. Windows 2000 will display "The wizard found a driver for the following device Ethernet Controller" in "Found New Hardware Wizard" dialog box, click <NEXT> button. [. . . ] When the Server prompt appears, load the NetWare Server Installation Utility ==> "LOAD NWCONFIG" 3. Select "Driver options" from the "Installation Options" menu. Select "Configure network drivers" from the "Driver Options" menu. Select "Select a driver" from the "Additional Driver Actions" menu. [. . . ]