User manual ENCORE ENMGS-16PLUS2

[. . . ] ENMGS-16+2 16-Port 10/100/1000Mbps Web-Smart Gigabit Ethernet Switch 16 x 10/100/1000 Mbps RJ-45 Ports 2 x 1000Mbps mini-GBIC ports User's Guide FCC Warning ENMGS-16+2 has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user's guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his or her own expense. CE Mark Warning This is a Class A product. [. . . ] System Name: Shows the appointed device system name. DHCP: Shows the DHCP status of the device. Location: Shows where the device is located. Trap IP: Shows the IP where the Trap to be sent. Subnet Mask: Shows the Subnet Mask set of the device. Gateway: Shows the Gateway set of the device. Monitor List All the Web Smart Device in the Monitor List can be monitored; you can also receive the trap and show the status of the device. System word definitions in the Monitor List: S: Shows the system symbol of the Web-Smart device, represent for device system is not alive. IP Address: Shows the current IP address of the device. MAC Address: Shows the device MAC Address. Protocol version: Shows the version of the Utility protocol. Product Name: Shows the device product name. System Name: Shows the appointed device system name. DHCP: Shows the DHCP status of the device. Location: Shows where the device is located. Trap IP: Shows the IP where the Trap to be sent. Subnet Mask: Shows the Subnet Mask set of the device. Gateway: Shows the Gateway set of the device. 20 View Trap: The Trap function can receive the events that happen from the Web Management Switch in the Monitor List. There is a light indicator behind the "View Trap" button, when the light indicates in green, it means that there is no trap transmitted, and else when it indicates in red, it means that there is new trap transmitted, this is to remind us to view the trap. View Trap button When the "View Trap" button is clicked, a Trap Information window will pop out, it will show the trap information including the Symbol, Time, Device IP and the Event occurred. (Figure 9) The symbol " " represents the trap signal arise, this symbol will disappear after you review and click on the event record. Figure 9. Trap Information Note: In order to receive Trap information, switch has to be configured with Trap IP and Trap Events in Web browser, which are available in the Trap Setting Menu (see Page 46 for detail). Add Item: To add a device to the Monitor List manually, enter the IP Address of the device that you want to monitor. [. . . ] Fiber Port Event: Monitoring the Fiber port status. Link Up/Link Down: a trap when there is linking status happens in mini-GBIC connection. Twisted Pair Port Event: Monitoring the twisted pair port status. Link Up/Link Down: a trap when there is linking status happens in 1000BASE-T connection. 46 Password Setting Setting a password is a invaluable tool for managers to secure the Web Smart Switch. [. . . ]