User manual ENCORE ENMVG

[. . . ] We assume no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of us. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by us; or (2) the serial number of the product is defaced or missing. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. [. . . ] 8 3. 2 Record Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. 3 Snapshot Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3. 4 Playback Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3. 5 Browse Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Chapter 4: Supports Center:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Chapter 1: Introduction 1. 1 Package Contents Upon receiving your ENMVG, please make sure the following items are included in the ENMVG package. ENMVG Device CD Quick Installation Guide USB cable 1. 2 System Requirements Microsoft Windows® 7/XP/Windows VistaTM IBM® PC or compatible, with Intel® Pentium® 4 2. 0GHz CPU or better Minimum 128MB memory and 100 MB hard disk space 1024x768 graphic card, DirectX® 9. 0c or above compatible graphic card or higher One free USB2. 0 port. CD-ROM drive Hard Disk: 5400 RPM or above (7200 RPM preferred) 1 Chapter 2: Getting Started 2. 1 Connect ENMVG To install the ENMVG into your computer, follow the steps below: 1. Connect the ENMVG to PC USB Hub. 2. 2 Device Driver Installation Placed the CD disk that comes with the ENMVG in the CD-ROM drive, then follow the on-screen installation guide below. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear. Click the "Setup Driver" button. 2 4. Select the Language and click "Next" to start installation. 5. Click "Next" button to continue. 6. Click "Next" button to continue. 3 7. Installation wizard will automatically copy driver to PC system, and then click "Finish" button. 8. Click "OK" button to restart PC system. 4 10. Connect the ENMVG Device to PC USB Hub, then system will detect new driver "USB Video Grabber". To make sure the driver is properly installed and started, open the "Device Manager". Please double-click the "Sound, video and game controller" 2. 3 Install the Utility software. 1. [. . . ] Switch Video Source: Click it to select Composite Video In or S-Video In 8. Volume: Adjust the volume or mute 3. 2 Record Video Click the "Setting" button to setup the record format 8 Setup the video format Click "Record" button to start capturing video 3. 3 Snapshot Image Click the "Setting" button to setup the image format The ENMVG supports BMP and JPEG image format. Please choose your desired format Click `Snapshot' button to capture image 9 3. 4 Playback Video Click "Playback" button to select video file. Choose the video then click "open" button. Movie Player function List: 1 About: To show the current version info 2 Exit: To exit the video playback window; alternatively, press [Esc] or [ALT]+[F4] on keyboard simultaneously 3 Minimize: To minimize the video playback window, click "MoviePlayer" in desktop taskbar to restore display 4 Hide Control Panel: To hide video control panel, right click video window and select "Control Panel" to restore display 5 Options: Click to open "Options" dialog and adjust settings for video window, snapshots, and playlist 6 Browse Image: To open image folder (refer to "3. 5 Browse Image" on page 12. ) 7 Step Backward: Step by step rewind recorded video 8 Step Forward: Step by step forward recorded video 9 Slow Backward: To slow rewind play recorded video 10 Slow Forward: To slow forward play recorded video 11 Fast Backward: To fast rewind play recorded video 12 Fast Forward: To fast forward play recorded video 13 Mute: To turn off audio, click again to restore 15 Volume Adjust: Drag the slider with the mouse or use Left and Right arrow on keyboard to adjust volume 10 14 Play/Pause: Click to play the current video file, click again to pause, click once more to continue 16 Stop Play: Stop 17 Snapshot: Capture current video frame as BMP or JPG image Default saved file name is "snapshot time" and saved under C:\My Pictures. You also can open "Snap Setting" option in "Options" to set snapshot saving directory, image format, and select rename file. 18 Play List: Show/Hide the Play List Window. [. . . ]